Q: Car shakes and squeaks

Hi. I suggest you try to open the door manually by switching the liftgate to manual mode. There is an on/off switch that allows you to do this located on the overhead console. This system is quite complex and it...

Your description of the lack of oil tells me your engine is probably already badly damaged. The main problem is you drove it home with the problems you have described. The only way to save a motor from damage when...

If the inner tie rod were to break or come loose, there is a chance steering the vehicle would become very difficult. Hire a technician to inspect the previous work done as well as check for new damage that may...

It is very possible that you could have an issue with your steering or suspension parts (https://www.yourmechanic.com/services/brakes-steering-and-suspension-system-inspection). You may have a ball joint (https://www.yourmechanic.com/services/ball-joint-front-replacement), tie rod (https://www.yourmechanic.com/services/tie-rod-end-replacement), or wheel bearing (https://www.yourmechanic.com/services/wheel-bearings-replacement) that has some free play. I would recommend having...

Hello, thanks for writing in. If this occurs only under this high load condition then most of the time it is caused by a boost leak. I usually suspect that the intercooler has a crack as that will cause this...

Hi there. The VSA light is on indicating that the traction control is active. This will turn on the brake system and try to control the vehicle in the event a tire will slip. The wheel sensor (https://www.yourmechanic.com/services/wheel-speed-sensor-replacement) on the...

The power steering pump pressure switch is located on the pressure hose just before the connections to the rack and pinion steering system. If you need further assistance with your power steering system (https://www.yourmechanic.com/services/power-steering-fluid-service), then seek out a professional, such...

If the noise only occurs when you use remote start, that means that whatever is in "that" (factory added) circuit would surely be looked at. As you probably know, problems of this type are diagnosed using electrical test equipment, along...

Hi Christian. Thanks for the additional information. Based on what you've indicated, I would suspect that you have worn out wheel bearings causing the vibration, especially if you are experiencing the vibration reduces and when you make a turn. However,...