Q: VSA problem
- VSA problem is within the transaxle system
- Logic sensor failure
- Internal power source failure
- Left rear TPMS failure.
My car has 130000 miles.
My car has an automatic transmission.
Recommended Services
| Wheel Speed Sensor Replacement | $123.10 - $666.75 | Get a Quote |
| Warning Light is on Inspection | $94.99 - $114.99 | Get a Quote |
Hi there. The VSA light is on indicating that the traction control is active. This will turn on the brake system and try to control the vehicle in the event a tire will slip. The wheel sensor on the left rear is not responding and due to that it has thrown the logic sensor failure and internal power source failure. I recommend replacing the left rear TPMS (tire pressure monitoring sensor) and this will fix the issue you are having. If you need further assistance troubleshooting your issues, then seek out a technician for an inspection of the VSA warning light and all other relevant systems so that this can be addressed appropriately.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Clutch pedal not working.
You may have broke the clutch cable. This is a common problem with this car. Usually the clutch itself does not break. I recommend you get a qualified mechanic to check your clutch pedal linkage or cable problem. You may...
How do I turn on the automatic exterior lamps?
The exterior lamp control is placed on the instrument panel, to the left of the steering column. To turn the exterior lamps to the automatic setting, rotate the control knob clockwise one notch, to AUTO. When the exterior lamps are...
Getting a diagnostic code P0410
Hi, there is no way to know what exactly is wrong with only a diagnostic code because there are always multiple reasons why the code could have been set in the first place. In this case, the computer has detected...
Dana35 rear differential pinion bearing is shot and not sure if it can be pulled through the hole for the drive shaft
You have two pinion shaft bearings. The one that can be replaced by removing the driveshaft and flange on the rear end. You remove the seal and the bearing can be removed. The bearing race cannot be replaced this way...
How many brakes are on a 2006 toyota corolla?
Hello, thank you for writing in. The 2006 Toyota Corolla has two different types of brakes on the vehicle. It will have two front disk brakes. These are considered the best types of brakes, and are used in front because...
One of my front tires is angled different now that I hit a rock. Could an alignment fix it? 2007 Mercedes C230
Hello - you are correct, an alignment is not going to properly repair this damage. There may be a bent or otherwise damaged suspension control arm (lower) (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-control-arm-assembly) or tie rod. I recommend a steering and suspension inspection (https://www.yourmechanic.com/services/brakes-steering-and-suspension-inspection) performed...
My brother-in-law is fixing the car. First time yes it's been going on about two weeks finally the check engine light came on yesterday.
If the spark plugs are becoming coated with engine oil and there is excessive oil in the exhaust system, then there could be three symptoms to check. Symptoms PCV Valve could be plugged making the engine over pressurize and forcing...
I have a 2007 Mini Cooper le and recently I have a diminished check engine light. Car runs fine but my turbo no longer seems to work.
Hi there. Usually when a check engine light is on half and the other half is black, that is usually an indication for the gas cap not sealing properly. Check the gas cap (https://www.yourmechanic.com/services/gas-cap-replacement) seal and see if it's cracked,...
Related articles
4 Essential Things to Know About Your Car’s Check Engine Light
The Check Engine Light turns on when there's an engine problem. A bad oxygen sensor or failed spark plug are common causes for the Check Engine Light.
Symptoms of a Bad or Failing Coolant Level Sensor
If the Coolant Light stays on permanently, there is low coolant, or the engine is overheating, you may have to replace the coolant level sensor.
How to Replace an Air Cleaner Temperature Sensor
The air cleaner temperature sensor allows the computer to adjust engine timing and air/fuel ratio. A rough idle or "engine lag" are signs of failure.
Browse other content
Services
Maintenance