Q: When turning left or right clinking noise in the front.

asked by on

It's hard to describe the noise it makes when turning left or right but it clinks and clicks.

My car has 66000 miles.
My car has an automatic transmission.

Lift the hood and have someone turn the wheel back and forth while you feel the top of the strut under the hood and listen and feel for the upper strut bearings making noise. They may need to be replaced.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. When turning left or right clinking noise in the front.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: I Need to find transmission speed sensor location for a 2006 mazda 6s,auto 6 speed & manual

Hi J. M. Thanks for contacting us tonight. The speed sensor for a 2006 Mazda 6 is accessible through the engine compartment and is located on the top of the differential, towards the driver side of the engine compartment. Since...

Q: Would like to get an estimate cost to swap my engine with a 2JZGTE Motor and to do it without converting my car from a FWD to RWD

Hello. The engine swap you are inquiring about would require heavy customization, and for this reason is not a service we would be able to provide. The 2JZGTE is a rear wheel drive motor, designed to be longitudinally mounted, and...

Q: Transmission acting up causing car to shake and loose acceleration.

Hello, with a fault like that there is a good chance that a code has been set in the traction system, transmission, and engine control. A scanner will need to be connected to check the system. The most likely cause...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...