Replaced battery & now check engine light is on.

Replaced battery & now check engine light is on. Mechanic's Assistant: Does the light stay on, or does it blink? Stays on Mechanic's Assistant: What is the make/model/year of your car? Nissan Rogue 2016 Mecha...

Replaced battery & now check engine light is on. Mechanic's Assistant: Does the light stay on, or does it blink? Stays on Mechanic's Assistant: What is the make/model/year of your car? Nissan Rogue 2016 Mechanic's Assistant: Are you fixing your Rogue yourself? What have you tried so far? My grandson replaced the battery and mentioned a wire wasn't connected and there were many different lights and warnings came on. He then connected the wire, but engine light stayed Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? The battery died during the Sub-Zero temps were having. I waited to replace the battery until I knew it wasn't frozen. However I don't know if it was frozen any time during the week of low temps.

Automotive Expert
Welcome to JustAnswer! You can ask unlimited questions to any of the 12,000 Experts! From doctors, lawyers, tech support, contractors, tutors, auto and boat mechanics, appliance technicians, veterinarians, accountants, appraisers, psychologists, engineers, heavy machinery masters, dream interpreters, and more, we've got you covered, 24/7. My name is \*\*\*\*\* \*\*\*\*\* I will be able to assist you. I’m sorry that you’re having trouble with your vehicle. Don’t worry though, we’ll be able to figure this out. Thank you for taking the time to let us help you out with this problem and hopefully we can sort it out quickly. Please understand that I do not know your knowledge or capabilities so I may need to ask questions to find out basic information to help solve your specific problem. Sometimes it may take a moment for me to respond because I may have to look up information about your concern. I appreciate your patience and will provide responses as soon as possible. The check engine light will come on when the computer sees a problem that affects the performance of the engine or transmission. There are many problems that can fail that will trigger this. It could be a faulty sensor, wiring issue, module fault, engine malfunction, etc. To see what specifically is causing the light to come on the vehicle will need to be tested with a scan tool that connects to the vehicle. This test will provide a trouble code that describes what specific system is having the problem. If you can have the vehicle scanned and can give me the code, I will be able to tell you specifically what is wrong with it. If you do not have a scan tool then you can bring your vehicle to any auto part store and they will scan it for free and give you the trouble code. I would do this ASAP so that we can determine what the problem is and keep any other problems from happening. My goal is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. If I’m not online at the time, I will respond ASAP when I get back.

Automotive Expert

Problem resolved Cancelled Just Answer 2/22/2021
Automotive Expert

I can't rate an answer that I did not recieve. I paid the initial $5 and cancelled this service before I had to pay the additional fee requested to actually obtain the answer to my question.
Automotive Expert
I am here to answer automotive questions that are given to me. I cannot see your account details or billing information, but Customer Service is happy to assist you. You can contact them here: []( or by calling(###) ###-#### (###) ###-####

What others are asking

Why is my transmission slipping?
The transmission in your truck has the updated 4L60 series with a heavier duty forward gears and thrust bearings so your transmission problem is most likely the torque converter or front pump failure. The clutch materials in an automatic transmission...
My horn won't work
The horn being inoperative could be from either the steering wheel clock spring, or the horn assembly. Both have been known to cause the problem you described. The Check Engine Light could be on for a sensor problem, or a...
Car idles rough when in gear
Hello. If the idle is that low, then it can be caused by a number of things. Most of the time it is caused by a vacuum leak or a dirty throttle body. The throttle body being the most common....
Where is the camshaft sensor position A in a 2008 Honda Odyssey 3.5L V6 engine?
Facing the motor in the van you will find the sensor in the front of the rear of the cylinder head. That would be passenger side of the rear head. Mounted in the end of the head.
Are the front driver and passenger strut assembly parts the same for the 2008 Buick Enclave?
When I look up the strut assemblies parts on this vehicle the left and right struts use the same part number. They are the same.
Misfires of several cylinders on highway drive
Hello - this is a known issue, and BMW has a technical service bulletin out to address this (#385317). A software upgrade to the engine management computer is the repair for this. You should check with your BMW dealer's service...
ticking at idle
Hi there. The lifters are sticking causing the push rods to be loose and tap on the rocker arms. Put one quart of ATF in the engine oil and run the engine for 15 minutes at 3,000 rpm's. Then change...
Vehicle feels as if it is dragging or pulling something.
Hello. We will be happy to assist you. The pulling feeling you experienced may or may not be normal, depending on how excessive the pulling is. It may be a good idea to have a technician test drive the vehicle...
Power Steering return hose leak
Hi There, You are likely correct in that if the leak is not coming from the high pressure line, it may be leaking from the return lines. I would suggest having a professional from YourMechanic come to your location to...