Ford CLT9000 service by top-rated mechanics at the convenience of your home or office

If you are still getting the P0720 code (https://www.yourmechanic.com/article/p0720-obd-ii-trouble-code-output-speed-sensor-circuit-malfunction-by-brady-klopfer) after replacing the sensor then you should verify the wiring connection first to the sensor and also in between the sensor and ECM. Remove the sensor and turn the drive shaft....

It appears that you may be experiencing signs of a worn out clutch given the year and mileage, that may likely be the case if this is the original clutch. Other components such as the clutch master and clutch slave...

Spark plugs blowing out are not uncommon for that specific year and engine of the vehicle. When a spark plug blows out, usually the threads need to be repaired, or replaced, and a new spark plug installed. This job may...

You need to check the fuel inertia switch in the right passenger kick panel to make sure it is not tripped. If not tripped, then check that the pink wire in and out has power when you crank the engine....