Q: Why does my car turn off?

Proper battery maintenance will ensure long battery life. A functioning battery is necessary to keep your vehicle running. But batteries can also be dangerous. Whenever you perform battery maintenance, make sure you take all of the necessary safety precautions. To...

You did not mention what motor or transmissions either of the vehicles have. These are the biggest and most expensive repair concerns on any used vehicles. Firstly, I would not recommend buying a used vehicle (https://www.yourmechanic.com/article/how-to-buy-a-used-car) without having a qualified...

Unfortunately, you have done all that you can do without removing the door panel and accessing the lock assembly from the inside. It is likely that a release rod that connects your handle to the latch has come loose. There...

Many different systems can cause a stalling malfunction on your vehicle. The most common are a fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement), fuel filter (https://www.yourmechanic.com/services/fuel-filter-replacement), spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement), battery (https://www.yourmechanic.com/services/battery-replacement), wiring fault or a crank (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement)/cam sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement). If the timing belt (https://www.yourmechanic.com/services/timing-belt-replacement)...

Many times when a vehicle has been involved in a flood, it is typically considered to be totaled. There are so many electrical systems in newer automobiles that it would be very tough to test everything for water damage. I...

Hi there - in this case, you have nailed it - it's the passenger side engine mount. The engine mounts on this engine (L & R) are hydraulic, and leak fluid when they rupture. It is possible that both of...

This is probably a consequence of air trapped in the system, and consequent aeration of the fluid, which builds pressure in the reservoir. If you did not experience this problem prior to the pump replacement, it might be due to...

Hi There, As you know, code P0332 relates to the knock sensor, which may be a result of code P0306, which relates to the crankshaft position sensor. When the crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) is detected to have more than a...

Hi there. Among the items you listed that were recently completed, the suspension alignment may have triggered the Service Advancetrac light. This system is comprised of multiple sensors and components that make up the suspension, steering and braking system. It's...