Exception in rendering!

Message: window is not defined

ReferenceError: window is not defined
    at new c (/tmp/execjs20161208-33384-1f3ukuejs:136:3912)
    at m.mountComponent (/tmp/execjs20161208-33384-1f3ukuejs:47:15602)
    at /tmp/execjs20161208-33384-1f3ukuejs:49:31860
    at a.r.perform (/tmp/execjs20161208-33384-1f3ukuejs:47:12503)
    at Object.a [as renderToString] (/tmp/execjs20161208-33384-1f3ukuejs:49:31821)
    at r (/tmp/execjs20161208-33384-1f3ukuejs:50:21164)
    at Object.S.ReactOnRails.serverRenderReactComponent (/tmp/execjs20161208-33384-1f3ukuejs:32:6073)
    at eval (eval at <anonymous> (/tmp/execjs20161208-33384-1f3ukuejs:173:8), <anonymous>:10:23)
    at eval (eval at <anonymous> (/tmp/execjs20161208-33384-1f3ukuejs:173:8), <anonymous>:17:3)
    at /tmp/execjs20161208-33384-1f3ukuejs:173:8

Q: What size bolt should I use?

asked by on

m6x1.00 x30mm is to small. what is the right size for the top bolt fixed guide?

A: Hi - From your description, I&#39;m not sur...

Hi - From your description, I'm not sure which bolt you are referring to, but you can measure both bolt diameter and pitch to determine the answer to your question. The pitch can be measured with a thread pitch gauge and the diameter can be measured with a micrometer. Then, you can purchase the correct bolt accordingly.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: What's the best way to get bolts off of the water pump pulley

I will usually try to break the bolts free from the pulley before I remove the belt. Sometimes you can put a little extra tension on the belt by pressing on the tensioner, while using another wrench to break the...

Q: Car is critically losing oil but never depleted entirely when refilled.

It sounds like you may have an oil leak, potentially at either the oil pan gasket area or at the lower end of the timing cover. The leak may be more noticeable when the car is not running since the...

Q: Checking the engine by taking the intake manifold off on the Chevy 350 V8

When you pull the intake manifold off, you're going to see all the gaskets in there, and you can look at the valves. You can see if the valves have carbon build-up and if they need cleaning. There are quite...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the P0052 code means This code is seen when the Engine Control Module (ECM) tries to control the...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...