2011 C70T5 oval when putting year won't move in reverse o...


2011 C70T5 oval when putting year won't move in reverse or forward Mechanic's Assistant: What is the make/model of your '11 car? 2011 C70T5 oval when putting year won't move in reverse or forward Yes Mechanic's Assist...

2011 C70T5 oval when putting year won't move in reverse or forward Mechanic's Assistant: What is the make/model of your '11 car? 2011 C70T5 oval when putting year won't move in reverse or forward Yes Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? Yes I am


When will i get a text
Automotive Expert
Hello and Thank you for the question. I am here to help answer your questions. Please allow me a few minutes in between our responses to review your information. I may ask several questions to get more details about your problem. While you are waiting for me to respond I am looking up the workshop manuals and wiring diagrams needed to answer your concerns. **The website will prompt a phone call automatically, NOT me. So please don't let this automatic service prompt annoy you. I prefer using text-only since most of the time I am inside the shop.** Is the check [engine](/topics-engine-volvo/) light ON? When was the last time the transmission fluid was changed?

No the check engine light is not on And I had to replace the transmission cooler line which I did myself I am now I am new to the car so I'm not familiar with it I did not add any transmission fluid but when I put the car in drive or reverse or any other gear it does not move it just rubs really high
Automotive Expert
The RPM just rev up but not going anywhere. This is a sign of a transmission issue specifically the valve body.
Automotive Expert
I'm assuming there is enough transmission in there. How much mileage?

I'm saying that when I give a gas it just rubs up it doesn't engage could just be a cylon oi'd78.000I don't know where the transmission dip stick is at
Automotive Expert
Hold on
Automotive Expert
see link
Automotive Expert
You will see it when you are underneath the vehicle near the trans pan.

If the transmission fluid is low will it cause it to no engauge into gear
Automotive Expert
Lack of fluid would not engage the gear.

Is there a dip stick on this carOr how do i add the fluid
Automotive Expert
Remove the dipstick and pump the fluid in there with a hose.

Hi good afternoon i fixed the problem it was just fluid buy now When I would think a vertical top down on the - it says trunk unlock in a loud beeping noise keeps beeping as you drive even when I put the top up it says the same thing how can I get this to stopThank you for your help I really appreciate your time
Automotive Expert
You are welcome. For the other question, you will need to create another question on the site.

What others are asking

How do you work the Rear Window Defroster?
Your car is equipped with both front and rear defrosters. While the front defroster is controlled with the fan speed/blower knob and ties into your air conditioner, the rear defroster is different. Here’s how to work it: Locate the Rear...
How do I use the low traction mode?
Your vehicle may be equipped with an Allison Transmission or a Hydra-Matic 6-Speed Automatic Transition. If so, you will have a Low Traction Mode that can make it much easier to drive your car in inclement weather or slippery conditions...
Battery light is on and car has no power steering
If the Battery Light is illuminated and the battery passes a load test, then you most likely have a faulty alternator; a charging system test would need to be performed to verify this. On the 2001 540i, the power steering...
Popping/clicking when turning left and or right from a stopped or a slow moving position
Hi there: One of the common mistakes made when people add suspension lift kits onto a 4WD is they forget to add a steering stabilizer stop (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-steering-stabilizer-stop). Trucks and SUVs with larger aftermarket tires and wheels require the use of...
Why is my steering hard at idle after replacing powersteering pump and rack
Anytime a system is contaminated with metal from a failed part, you will get filters that get clogged. Since you installed a return line filter, this will help filter out any contamination but may also starve the pump of fluid....
My car has started heating up, reached "cooling mode on" with temperatures of 250+, and it sounds like the fan stays on when I turn off car.
This can be caused by a number of things such as low coolant levels, a faulty thermostat (https://www.yourmechanic.com/services/thermostat-replacement), or a failing coolant fan switch. As you may know, the coolant fan switch (https://www.yourmechanic.com/services/cooling-fan-relay-replacement) helps to maintain the proper coolant temperature...
Transmission switches gears but doesn't engage in any gear. 1996 Geo Metro
Hi there - first thing to check is the fluid level in the transmission. If the fluid is low (if the axles are out, is the fluid very low also?!), the transmission will not engage gears (https://www.yourmechanic.com/article/does-an-automatic-transmission-have-a-clutch) correctly. Check for...
Oil Change
The maintenance minder in the vehicle computer, that reports remaining oil life as a percent, is the only authoritative guide to scheduling an oil change, subject to one caveat: change the engine oil at least once per year, regardless of...
Will a faulty Knock Sensor cause my car to shut off while driving?
Less than 1 hour is required to replace the knock sensor (Hyundai OEM part number: 39250-2B000) on your particular engine. The dealer (OEM) knock sensor, which is the preferred part, costs around $50. A knock sensor, even if faulty, can...