Q: My Toyota Belta 2009 vibrates when I put the gear in drive and reverse

asked by on

My Toyota belta 2009 vibrates bad when i put the gear in drive or reverse I hate that noise please help

My car has 50000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. My Toyota Belta 2009 vibrates when I put the gear in drive and reverse

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How can I tell if the motor mount needs to be replaced?

Hello. This problem may or may not be detected visually—excessive engine movement may be seen while idling—or by feel—engine movement can cause contact with the chassis or something else on the car, which one can feel. The motor mounts on...

Q: 2009 Subaru Forester Runs Rough

There are numerous potential causes for your concern. Your vehicle has electronic throttle control, as you mentioned. In this system, a stepper motor integrated into the throttle body is used to control throttle position. The main inputs for throttle control...

Q: On Gear (D) I can't go more than 40MPH speed,

This is likely a transmission problem dealing with the proper shift points. There is an ECU module in the transmission that regulates when the transmission shifts from one gear to the next based upon engine RPMs and activated by a...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...