Q: maxima 2000 el sistema de seguridad se blokeo en modo seguro que significa eso

Without knowing which kit was used and how it was installed I will answer this the best I can. With any electrical parts, the most common failures are due to heat and corrosion. Any wiring should be sealed as close...

Many different faults can cause the vehicle to clunk and not be able able to shift out of gear. Transmissions use the fluid to help change gears, and when fluid is low or dirty, it can cause many issues with...

Hello. I am not too sure about the question you are asking. From what you've described, it sounds like you used the tow/haul button when you raced your truck and ever since the engine is making noise. If this is...

The throttle position sensor is designed to monitor the position of the throttle butterfly valve in relation to the throttle pedal position. If the engine runs rough when it is plugged in and runs fine when it is unplugged, then...

Hi there. The ignition system could be locked out by the security system or the ignition switch has failed. Look at the security light and see if the light is flashing quickly and see if the light stays on when...

Code P0730 (https://www.yourmechanic.com/article/p0730-obd-ii-trouble-code-incorrect-gear-ratio-by-ian-swan) is linked to the problem you are describing. Therefore, it's worth ruling in or out the typical causes of code P0730 which include dirty transmission fluid, low fluid, blocked filter, broken mechanical components within transmission, internal blockage...