Q: My car runs poorly when the idle sensor is connected, without it the car runs fine

asked by on

My Car Is jerking once i plug in the idling sensor specially after driving few kilimeters and when i unplug it the car travel well

My car has 323000 miles.
My car has a manual transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. My car runs poorly when the idle sensor is connected, without it the car runs fine

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: White smoke from exhaust and car rumbling while stopped or idling.

It sounds like you may be getting oil into the combustion chambers of your engine causing it to burn off in the exhaust. This is the white smoke you see. This may also be related to your idle issue as...

Q: Car shakes at idle and low speed, shuts off at stops. 1993 Mazda MX-6

Hi there, thanks for writing in about your 1993 Mazda MX-6. It sounds like the idle air control (IAC) motor is gunked up and either needs to be cleaned or replaced. Turning on the AC causes the IAC to change...

Q: stuttering when in cruise control

It is very likely that an issue such as this would be associated with the check engine light. I would recommend having your vehicle inspected by a qualified professional to determine if any trouble codes are stored in your vehicle....

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
How Much Does a Mechanic Make in Vermont?
Automotive technician jobs in Vermont have an average mechanic salary of $37k, with some mechanics earning a salary of $53k.
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.