Hello sir I have a lexus Ls400 I am changing the abs brak...

Hello, my name is \*\*\*\*\* \*\*\*\*\* to just answer! I will be assisting you with all of your vehicle questions today. I’m really sorry that you’re having this issue and I’m going to help you through it, but please understand that I (respectfully) don't know your skill level or tools you have to assist us to diagnose/repair your vehicle. Also, understand that I can't see, smell, hear or touch the vehicle either, so your patience/understanding is appreciated. Please allow me up to 10 minutes to gather schematics and other pertinent information for this issue. I do not know anything about the fees or charge so please if you have any concerns, direct them to customer service. My aim is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. I appreciate your patience and will provide responses as soon as possible. Thank you. what year please?

95

theres not going to be any brake pressure built up. the only time there's a pressure build-up is when you press on the brake pedal. you can pull the abs fuse and then put some rags below the lines on the abs module to catch the fluid that will come out.

Very well had to be certain thank you. Only other question would be will I need any sort of scan tool or the like to clear out any codes or anything after completing the part swap?

no sir. but you will need to do a complete bleed of the system is this a new abs module or a used one?

Absolutely have already prepared for that. It is going to be a used module.

ok, then you may need a scan tool to clear any codes. (see attached procedure)

Well thank you very much sir you have been most helpful

you are very welcome. please stay well.

You too sir thank you

ty

I rated you a 5 as you were very polite and very fast and knowledgeable. Thanks again for your time

you are very welcome. please stay well and thank you