Hi, My 2007 Jeep Liberty just started chugging on the way...
Responses
Mechanic01
236 days ago
Hello and thank you for using JustAnswer. My name is \*\*\*\*\* \*\*\*\*\* I will do my best to assist you. During this conversation you will be given an automated offer for a phone call. You may accept or decline that offer.I don’t personally offer this service so if you take this another tech may call.
Next you need to check spark and injector pulse, heres some videos on how to, let me know what you find, thanks
https://www.youtube.com/watch?v=9UyxRc2lCvk
https://www.youtube.com/watch?v=pzeOz-seIQE
Customer
236 days ago
I gave info of what I had done thus far and I got two YouTube videos. I had to spend $34 for those which didn’t help by the way. The guy at oriley auto parts gave me more help. Told me there would be an option to have someone call but he was not gonna be that guy because he didn’t do that sort of stuff. Thanks for supplying me with someone who just didn’t seem to care about my situation. I have had great help in the past but didn’t get that this time. I will not be coming back nor will I recommend anyone to your service.
Mechanic01
236 days ago
your very welcome, have a great day
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Brake fluid leaking
If the vehicle is leaking brake fluid, I would stop driving it, and have it serviced as soon as possible as your braking system is essential to road safety. Braking systems operate using hydraulic pressure, so any leaks are a...
Goes in gear but goes no where. Bleed the clutch
This sounds like you have a bad clutch or transmission input shaft is not turning for some reason. You should have the transmission removed to have the transmission and clutch checked to isolate the cause of the no clutch engagement....
There is a grinding noise that gets worse the faster I go.
Hello there, thank you for asking about your 2005 Kia Sorento. Most of the time if there is a grinding noise that is related to the speed of the vehicle it is caused by a bad wheel bearing. When a...
Why can't i fix O2 sensor problem
In many circumstances, the O2 sensors are not the only culprit of a lean fuel curve. In many cases, a clogged fuel injector (https://www.yourmechanic.com/services/fuel-injector-replacement) nozzle can also trigger the most common OBD-II error code (P-2191) (https://www.yourmechanic.com/article/p2191-obd-ii-trouble-code-system-too-lean-at-higher-load-bank-1-by-jay-safford) that indicates a lean...
Abs and esp light randomly come on with a jerking and clicking noise under hood
Hi there. Most of the time when this occurs randomly like this it is because there is a problem with one of the wheel speed sensors. I usually start by checking the tires first. If one of the tires is...
Stalling vehicle when vdc and slip light comes on
Hi there. I've seen this same concern during my tenure as a Nissan service manager. What usually happens is the wire harness to those sensors becomes brittle and loose. When this happens, it does need to be replaced/repaired. The odds...
Returning Odometer setting to actual miles
Hello. On your particular vehicle it has a couple things which show on that screen such as Trip A, Trip B, the current vehicle mileage, and also the mileage until the next service is due. To toggle the screen you...
My oil gauge fluctuates with my rpm is this bad
The oil pump is driven by the engine. Consequently the speed of the pump will vary directly with engine speed. Higher engine speeds result in higher pump output pressure while at lower engine speeds pump output pressure will be lower....
I have a Fiat 500 sport I went to check the oil in the water and the water was a dark brown what would cause that
If you did not see any problems with the oil except it was low then I would suggest having oil and filter replaced. The coolant color would need to be checked to see if there is a problem since some...
Browse other content
Maintenance
Services
Estimates
Hi, My 2007 Jeep Liberty just started chugging on the way home from work. I stopped at auto parts store and we put it on the tester it said misfiring cylinder. Solution was to replace spark plugs and springs I. The coils. Did that...
Hi, My 2007 Jeep Liberty just started chugging on the way home from work. I stopped at auto parts store and we put it on the tester it said misfiring cylinder. Solution was to replace spark plugs and springs I. The coils. Did that still had problem but becaume worse. Took it back and put it back on tester error was number 2 cylander coil was bad so replaced that. Still have the same problem. HELP! Mechanic's Assistant: How many miles are on the Jeep? Do you have scan tool or a code reader? 149,000 Mechanic's Assistant: Are you fixing your Liberty yourself? What have you tried so far? I told you everything I have done at the beginning.