Q: How do I reset the Tire Pressure Monitoring System?

asked by on

How do I reset the Tire Pressure Monitoring System?

Your truck is equipped with a Tire Pressure Monitoring System. This system lets you know when your tire pressure is getting low. To reset the Tire Pressure Monitoring System.

  1. Drive the vehicle over 20 mph for 2 minutes.

  2. Park the car where you can get to every tire and have access to an air pump.

  3. Turn the ignition to the on position.

  4. Turn the hazard lights on and off three times.

  5. Starting with the left front tire and moving clockwise, let air out of the tire by removing the valve cap until the horn makes a noise.

  6. Set all tires back to the recommended air pressure .

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I reset the Tire Pressure Monitoring System?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Tire pressure light check

There are a few different types of tire pressure monitoring systems in the car. Some just show you when a tire is low, some show individual tire pressure, and some will tell you exactly which tire is low. The Lexus...

Q: Truck won’t start and I installed a new battery, I get power but once I try to crank the truck I loose all power.

It sounds like you may have a weak battery, a failing voltage regulator or failing alternator. As you may know, the alternator charges the battery while the engine runs by generating amperage and recharging the battery while the engine turns...

Q: How do I replace the battery in my key fob?

The key fob that comes with your truck has a battery inside. At some point in time, you will find the need to replace this battery. To replace the battery on your key fob. Use a thin coin to...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...