Q: Hi there i have a 07 chevy silverado 5.3 with misfire 1357 any sugestions

You can use the buttons on your steering wheel to toggle between songs when listening to a CD or MP3 disc. Press the up arrow on the steering wheel to go to the next track, or the down arrow to...

Depending on where and how the security system was installed, this can change the possibilities of various issues and fixes. An aftermarket system put in by a private party could have been installed in different ways that could cause issues...

Hey there. It may help to find the fuse for the instrument cluster, remove it for 10 minutes or so, then re-insert the fuse. Chevrolet appears to have had a "customer goodwill" repair available for this if your vehicle had...

Hi there. Based on what you've described, it seems like you may have either a combination meter issue or a loose/corroded connector/ground. Loose/corroded connectors can make some of the things in your vehicle behave erratic just as you mentioned. Make...

Hello - yes, it is possible the motor mounts are bad (https://www.yourmechanic.com/article/how-long-do-engine-motor-mounts-last) if the engine vibration is more noticeable when in Drive or Reverse. Worn or broken motor mounts allow the engine to twist when applying power. This can cause...

Hi there. The warning light and error code that indicates a camshaft timing sensor error is not always caused by the sensor itself. In fact, more often than not, the problem is with the electrical harness that connects the sensor...

This circumstance is not unusual and can be caused by the use of non-OEM rotors and brake pads and also the failure to re-apply factory specified shims and/or appropriate anti-squeal compounds and lubricants. Unfortunately, if and once non-OEM parts and...

Check for any OBD-II stored trouble codes that might provide clues. If you carried over your sensors, such as the transmission speed sensor, and other controls to the replacement transmission, I would first look for a fault with those external...

If you have one of the rear tires leaning in then you have damaged the upper control arm or spindle is bent. Have the vehicle suspension checked for damaged components and have alignment done.