Q: My back rear tire is leaning inward at the top and wheel is getting some tear on the inside of the tire

asked by on

My back rear driver side wheel leaning inwards

My car has 226 miles.
My car has an automatic transmission.

If you have one of the rear tires leaning in then you have damaged the upper control arm or spindle is bent. Have the vehicle suspension checked for damaged components and have alignment done.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. My back rear tire is leaning inward at the top and wheel is getting some tear on the inside of the tire

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What's the difference between the ECM and PCM?

The engine control module (ECM) controls all the engine functions to keep it running correctly monitoring all the sensors of the engine. The power train control module (PCM) will include multiple control modules in one case called a PCM. The...

Q: Had front struts replaced, would the coil be replaced as well? The coil doesn't look new

Hello. Changing the strut consists of just that, replacing the strut. This is the center part that looks similar to a shock. If you were expecting more then the strut, then it would have been a more expensive job. What...

Q: Lights on left side of car not working

If the lights on the left side of your car are not working, then there may be one of several electrical problems. Perhaps a bulb has burned out, or a relay has malfunctioned. As this problem is probably electrical in...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.