Truck felt like it was slipping on ice and the locks kept...
Responses
Customer
223 days ago
Ok
kevinf630
223 days ago
take the battery out and get it properly charged. after that you'll need to get the charging system checked. these two steps will need to be done first.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Lots of noise on startup, car isn’t a morning person
Hello! Thank you for writing in with this question. Due to the design and characteristics of the “boxer” style engine, this cold-start noise is considered “normal” by Subaru corporate. It may be a good idea to have a professional at...
How do you activate the daytime running lights?
Some models are equipped with a supplemental daytime running light system. Essentially, this system turns on the headlights at a dimmer setting than what’s used at night to provide visibility for other drivers during the day. It’s particularly helpful for...
Fuel pump not working after sitting
If you do not hear the relay click, you may be losing power before the relay or the relay itself could be faulty. I would enlist the help of a technician who is proficient in electrical diagnosis, such as one...
bad tie rod end
When you say a bad tie rod end, this means that it is loose. This means that it may come off and you would loose steering control. If it is bad enough for you to ask for advice, then you...
Shuddering, check engine light on. 2005 Saab 9-2X
Hello. It is possible that the previous repairs could cause this problem. It is also equally possible that the new problems are not related to the previous problems that you were having. If the timing belt (https://www.yourmechanic.com/services/timing-belt-replacement) is not on...
Car is throwing trouble code P0746 and it is a solenoid valve problem.
This code (https://www.yourmechanic.com/article/p0746-obd-ii-trouble-code-pressure-control-solenoid-performance-or-stuck-off-by-valerie-johnston) relates to the pressure control solenoid that regulates the pressure of the transmission fluid flowing in and out of the valve body inside the transmission. Generally, this is usually related to some kind of foreign material that...
Can bad ball joints cause the wheels to have a lot of play from side to side?
You may be feeling the steering moving back and forth since you have both tires off the ground. Try to only have one tire off the ground at a time and see if you still feel the movement. If you...
No coolant in the reservoir. Seen low coolant message. I added 2 quarts of 50/50 coolant. Still getting the message. How much coolant doe it need?
Hi there. For the coolant light to go out, you would need to have the coolant between the low line and the full line for the light to go out. If the coolant is low and keeps on being low,...
A clunking feel and noise in the steering wheel
It is possible that you could have some free play in one or more of your suspension components. There could be play in your ball joints, tie rods, or wheel bearings. I would recommend getting your wheels shaken down by...
Browse other content
Maintenance
Cities
Estimates
Truck felt like it was slipping on ice and the locks kept locking and unlocking and couldn't drive past 15 mphs and when I accelerated it would jerk. Shut it off and won't turn on and [battery](/topics-battery-gmc/) is dead. And I...
Truck felt like it was slipping on ice and the locks kept locking and unlocking and couldn't drive past 15 mphs and when I accelerated it would jerk. Shut it off and won't turn on and [battery](/topics-battery-gmc/) is dead. And I have a brand new battery in it Mechanic's Assistant: Did you test the battery with a voltmeter? And have you ever changed one before? Battery is new Mechanic's Assistant: What is the make/model/year of your car? 2015 gmc acadia Mechanic's Assistant: Are you fixing your Acadia yourself? What have you tried so far? Next step charging the battery it's completely dead Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? When connected to jumper cables power comes on but truck won't start