☰
GET A QUOTE

Since I changed the ignition module my 94 chevy truck hes...


Since I changed the ignition module my 94 chevy truck hesitates and surges especially when I m driving it. Didn't do that before Mechanic's Assistant: Have you checked the battery lately? Battery is only a year old Me...

Since I changed the ignition module my 94 chevy truck hesitates and surges especially when I m driving it. Didn't do that before Mechanic's Assistant: Have you checked the battery lately? Battery is only a year old Mechanic's Assistant: What is the model/year of your Chevy? 94 silverado k1500 Mechanic's Assistant: What year is your Chevy? 1994 Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? Nothing really. Don't know what to try Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Had a new fuel pump installed a year ago

Read More

Responses

Automotive Expert
Hi,sorry for the delay,My name is \*\*\*\*\* \*\*\*\*\* i will do my best to assist you,I am sorry you are having this issue and i understand it can be frustrating does the [engine](/topics-engine-chevy/) light stay on?if so, can you give me the trouble codes?

Engine light not on
Automotive Expert
ok why did you replace the module? exactly what does it do?

Would not start. Starts now but runs rough like misfiring or not getting fuel property. Could I have got it out of time?
Automotive Expert
did you pull the distributor out? did you take the plug wires off?

No. Just removed the capFrom the cap. But I'm pretty sure I got them back on right
Automotive Expert
you didnt take the plug wires loose? you may have the plug wires crossed.. you need to check them '

Not from the plugs
Automotive Expert
you took them off of the cap..correct?
Automotive Expert
what engine do you have?

Ok. I have a friend that is a pretty decent mechanic. I'll have him to look at it tomorrow
Automotive Expert
ill show you how they go

Engine is a 350, 5.7 ci
Automotive Expert
one moment
Automotive Expert
please click the link
Automotive Expert
thanks

Ok. Thanks
Automotive Expert
You are very welcome It has been a pleasure working with you. thanks for using justanswer.com

Still not sure what you need?

Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.

Get a Diagnostic

Top Questions

Trending Topics

What others are asking

Right rear tire joint broken
The rear tire of your vehicle rides on a hub bearing. If the bearing separates, the tire can come off with a portion of the hub attached. Typically before this happens, a bearing will start making roaring or grinding noises...
Read more
Can I use a jump starter on my Prius?
You can use a booster to jump the small battery on the Prius but it does require specific training to do it correctly. You should either get a Prius service manual or have a Prius trained mechanic show you the...
Read more
How hard is it to replace the transmission and engine mounts?
This depends heavily on your own mechanical ability and access to the proper tools. I would recommend having an expert from Your Mechanic come to your home to replace your motor mounts.
Read more
My car will not shift out of drive and into park - 1999 Hyundai Sonata
Hi. This sounds like the ignition switch has a problem and is not allowing the car to go into park. If the ignition switch is not sending the signal to the neutral safety switch that the key is in the...
Read more
Vehicle not starting
Hi there: We're not quite certain what you're asking; however, the P0255 OBD-II trouble code (https://www.yourmechanic.com/article/p0255-obd-ii-trouble-code-injection-pump-fuel-metering-control-a-intermittent-cam-rotor-injector-by-valerie-johnston) is typically triggered by dirty fuel filter, clogged fuel filter, defective fuel pump or open electrical connectors or sensors. The best way to have...
Read more
Hi, I have a problem with the hazard button, it does not turn on at all.
The circuit that that powers the emergency flashers (hazard lights) includes the switch, flasher unit, fuse, wiring, grounds, bulbs, bulb sockets, and sometimes a relay. Before the switch is condemned, the circuit is tested to see if power is even...
Read more
Could this be the TCM causing the problem?
Yes, no start in the scenario you are describing is possible especially if Code U1000 has set, along with other codes such as P0717, but there are multiple code scenarios or combinations. One quick strategy is to pull and visually...
Read more
just bought a 2008 kia spectra5 . drove it about 60 miles check engine light came on code is po700, po 755 but shifts fine car run
The p0700 code is more of a general information code, while the p0755 code (https://www.yourmechanic.com/article/p0755-obd-ii-trouble-code-shift-solenoid-b-malfunction-by-valerie-johnston) is much more specific. The p0755 code refers to the 2-4 shift solenoid in the transmission. The code can set due several possible issues. Low...
Read more
My 2004 jeep cherokee turns off while driving
During one of the no start incidents, you can check for ignition and fuel pressure (including injector operation). Electrical components will sometimes cut out as heat builds (coils, for instance). But, if you test the appropriate components during the period...
Read more

Browse other content

Maintenance
Cities
Cars
Estimates