My car is in reduced power mode, the [engine](/topics-eng...
Responses
Mike V.
235 days ago
Hi, my name is\*\*\*\*\*’ve been a technician on Just Answer since 2007 and I'll be helping you today. I'm sorry to hear you are having difficulties with your vehicle. I know how inconvenient car trouble is, but together, we will get your vehicle back up and running quickly.
May I ask whom I am chatting with today?
Customer
235 days ago
Kelsey
Mike V.
235 days ago
Hi Kelsey it's nice to meet you.
Do you happen to know what code is being stored?
Customer
235 days ago
P2199, P2135P2119\* not P2199
Mike V.
235 days ago
Thanks, \*\*\*\*\* \*\*\*\*\* moment ok?
Customer
235 days ago
Okay
Mike V.
235 days ago
Ok, if cleaning the throttle doesn't help, you likely are going to need to replace it with a new one. If you have a volt meter you can also test to make sure you are getting the proper voltage to the TAC on the throttle. Usually though if cleaning doesn't solve it, replacement is required. There is an off chance there could be an issue with the computer but that's not very common.
Customer
235 days ago
I have researched and the problem I have seen to be the most accurate is a bad throttle position sensor
Mike V.
235 days ago
The TPS is a possible cause for the P2119 code, not the P2135, it is worth trying the TPS, but most of the time the code is the result of a bad throttle body that's stuck closed because the motor isn't working properly.
Customer
235 days ago
Okay. They were both reading. Then I cleaned the throttle body and now the light is back on again. So maybe I should read what this light is to determine the problem
Mike V.
235 days ago
It won't hurt, I am thinking you might have a misfire issue going on. It might not be in failsafe just having a loss of power due to a misfire. If cleaning it did help it for a bit.
Customer
235 days ago
What?
Mike V.
235 days ago
I am saying if cleaning the throttle helped with the original codes, you should check the codes again to see if they are the same ones or not.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
How do I adjust the auto door unlock?
Your vehicle can automatically unlock the doors when you finish driving, so that you can exit your vehicle more easily. These settings can be adjusted based on which doors you would like to unlock (driver door, or all doors), and...
Horn and brake lights not working
Hello. The issues you are having are likely being caused by two separate things, but it is possible that shorted wiring is affecting both. A technician can examine the brake pedal switch, and also test the voltage coming to the...
Put a brand new alternator in it and new battery and it still does not want to charge the battery is this
Inspect fuse number 11 and 30 in the fuse box. Check the grey fuse link near the starter. If both of these are good then check fuse 19. In fact, its best to check all the fuses for any blown...
Evap vent valve has oil coming from it.
Is the check engine light on for a problem with the evap system vent valve? The fuel tank may have been overfilled. The evap canister has charcoal inside and if the fuel was overfilled it may be coming out of...
I put a fuel pump in and a fuel pump relay. The relay works but there is no power to the fuel pump.
Hi there. There could be an issue with the wiring to the fuel pump between the fuel pump relay and the fuel pump. Remove the wiring to the fuel pump and check the resistance from the wiring from the relay...
After a tune up I got a misfire in cylinder 3.
The hissing sound may be an indication of a vacuum leak, which may be causing the hesitation and misfire. High idle speeds or in some cases rough idle, stalling and hissing sounds are common signs of a vacuum leak. When...
My 2007 Dodge Caliber ACT won't shift out of lower gear, the temperature light and check engine light came on with a code of P0172
Hi There, This code relates to a rich fuel condition. This can be caused by a faulty mass air flow sensor, a bad fuel injector or a faulty coolant temperature sensor. In your case since the temperature light came on,...
Chrysler 300 C 2012.... battery saver mode
If there is an unusual odor (you refer to a burning odor), I would not drive the car. Other than the odor issue, based on what you are describing you are not going to worsen the situation. A particular concern,...
06 Chevy equinox decreased power light and traction control light on
It is possible that you could be having an issue with your throttle body or throttle position sensor. Many traction control systems use the throttle body to reduce engine RPM in the event of slippage. I would recommend having your...
Browse other content
Maintenance
Cities
Estimates
My car is in reduced power mode, the [engine](/topics-engine-chevy/) light is on, and it sputters when running Mechanic's Assistant: Has your vehicle stalled? Has anyone run a diagnostic test to pull the trouble code? Yes...
My car is in reduced power mode, the [engine](/topics-engine-chevy/) light is on, and it sputters when running Mechanic's Assistant: Has your vehicle stalled? Has anyone run a diagnostic test to pull the trouble code? Yes Mechanic's Assistant: What is the make/model/year of your car? Chevy cobalt 2008 Mechanic's Assistant: Are you fixing your Cobalt yourself? What have you tried so far? Yes. We tried cleaning the throttle body