Q: 2013 ford edge limited "service advancetrac light comes on

asked by on

The service advancetrac light comes on. If I'm stopped, and idling, it will jump into gear when I start to take off.

My car has 140000 miles.
My car has an automatic transmission.

It is possible that you could be having an issue with your transmission. I would recommend having your transmission inspected by a qualified transmission specialist to determine if any internal damage exists.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. 2013 ford edge limited "service advancetrac light comes on

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: my 2013 ford edge was taken to MIDAS for a brake change. i got the rear brakes and rotors changed, then they said my master cylind

AdvanceTrac is an electronic stability control or "traction control" system and while the warning is displayed that safety feature will be unavailable in emergency conditions or during periods of low traction. Although it is improbable that the AdvanceTrac fault is...

Q: I've got a 2012 328i, twin turbo 4 banger. Tpms malfunction, says all four tires are flat but they're obviously not. Advice?

Hello. If the TPMS system is showing that all four tires are flat then they are either low in air pressure, or there is an issue with the TPMS system. I would first check the air pressure on all four...

Q: clutch feeling softer

Hello! This can depend on a variety of factors, but specifically, your driving style can cause this. If you tend to drive harder than normal - meaning you tend to transfer a lot of power through the clutch by...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.