Q: why is my airbag sensor light on ? It has been on for 2 years , I have not gone and got it looked at. Is it serious or dangerous ?

My wife owns a 2007 Matrix and it's been an excellent car and 6,000 dollars is probably how much one of things is going to go for if it really has 65,000 miles. You'd want to get proof that it...

If you have replaced all of those components and you're still getting issues then the problem should be in the fuse box (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuse-box) with the body control module fuse located in it (on the driver side) or there is an...

Hello. From what you describe, it would appear that your vehicle is experiencing performance issues, perhaps misfires under heavy loads. If the engine is misfiring under heavy load it will most definitely be felt through the transmission and chassis. This...

Hi, thanks for writing in. A brake fluid leak is a major problem and the vehicle should not be driven until the leak is diagnosed and repaired. You may have a damaged hose, rusted through brake line, or a leaking...

You are going to need to have the ABS module put into bleed function using a scanner that can enable this function or have a mechanic that has a scanner (with this function) and a pressure bleeder to pressure bleed...

As you may know, the sway bar is connected to the lower control arm and the body of the vehicle and helps to maintain smooth handling under all different types of driving conditions. Depending on the severity of the sway...

The heater not working in some cases may be related to the overheating problem you are also having. This may be due to a faulty heater blower motor or potentially a bad heater core (https://www.yourmechanic.com/services/heater-is-not-working-inspection). As you may know, the...

A P0410 can be a real bear on a Mercedes. But first you need to check the simple stuff. The Auxiliary air system is an emission control device that blows air into the hot exhaust stream to help burn up...

Hello - a "hard start when cold, or left overnight" is usually a fuel mixture problem during cold start. The coolant and air temperature sensors cause problems when they do not accurately measure coolant and air temperatures, report bad temperature...