Q: When should you replace the spark plugs on a 05 xterra with 68000 miles

asked by on

When should I replace the spark plugs 05 xterra 68000 miles

My car has 68000 miles.
My car has an automatic transmission.

Hi there. You might want to look up your cars scheduled maintenance through our online search tool; as it will provide you all the recommended maintenance on Nissan including the spark plugs.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. When should you replace the spark plugs on a 05 xterra with 68000 miles

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Most of my lights on the dashboard besides engine light are lit up and also there is a little moisture around the transfer case and oil plug.

The dash lights could be on for a loose or broken ground wire to the chassis. Check all of the ground wires on the chassis and make sure that they are tight and clean. The moisture on the transfer case...

Q: The car is shaking when stopped and when you drive it hesitates and won't go to fast

There are a number of things that may cause the car to hesitate when accelerating such as low fuel pressure, a dirty or faulty mass air flow sensor, clogged or dirty fuel injectors, a faulty throttle position sensor or potentially...

Q: Advise on what to use for automatic transmission fluid

Automatic Transmission Fluid (ATF) can be petroleum-based, partially synthetic, or totally synthetic-based oil. All domestic automobile manufacturers require a petroleum-based fluid in their automatic transmissions. Some import manufacturers require the use of a partially synthetic fluid. ATF is a petroleum-based...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.