Q: Tire size compatibility for my Honda Civic

Hi there. A squealing noise is a common sign that the rotating parts such as your belts are slipping on their pulleys. A worn belt will make this noise due to the loss of tension and gripping ability of the...

You will need to have the brakes checked to see why the brake pressure is staying applied to the front calipers. It sounds like the brake master cylinder is not returning. There is a recall for the vehicle brake master...

Hello. You may still want to have a diagnostic troubleshooting code scan performed on the vehicle. Not all issues will automatically trigger a warning light. However, there may be mechanical issues to blame for this. You will want to take...

Hi there. There is only 1 catalytic converter that requires the O2 sensor (https://www.yourmechanic.com/services/oxygen-sensor-replacement) to work with it. The other two are a catalytic converter to help with emissions and a resonating chamber to quieten the exhaust before the muffler....

Hi there. It seems that the engine you have is a diesel engine. The code P2002 (https://www.yourmechanic.com/article/p2002-obd-ii-trouble-code-diesel-particulate-filter-efficiency-below-threshold-bank-1-by-logan-utsman) is coming up for the particulate filter and it has an efficiency issue. The only thing to do with this is replace the...

If the switch for your four wheel drive has broken and your vehicle is now stuck in four wheel drive, it is very likely that the broken switch is the cause of your issue. I would recommend having this switch...

Hi there. The rear end pinion engages with a ring gear and the other end of the pinion is supported on a tapered roller bearing. If there is any radial play in the pinion or axles itself, there is a...

Without a doubt, that tire should be replaced immediately !! The sidewall is the thinnest and weakest area of the tire and flexes the most. Although tires are steel-belted, the steel belt is only in the tread area. Sidewalls are...

You cannot just put on a shorter belt since the a/c compressor pulley keeps the belt routing correct and bypassing it would cause belt to not turn all the other pulleys correct without tearing up the belt. You will need...