Q: Sky slider not closing properly

asked by on

My sky slider is not closing properly.

The sky slider feature not closing properly on your Jeep Liberty is actually not an uncommon problem. There is actually a technical service bulletin that informs certified mechanics on the proper fix for this exact problem. In most cases this involves lubricating the tracks that the sky slider rides on. To be 100% certain this is the problem however, it may be time to enlist the assistance of a certified mechanic to come by and have a look at your Jeep to determine if this technical service bulletin applies to what it is experiencing. Whether the sky slider needs to be lubricated or if the problem is more severe, they will be able to identify exactly why your sky slider is not closing properly and assist in making any necessary repairs to so you can use this awesome feature without the fear of it not functioning properly.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1,000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!
  1. Home
  2. Questions
  3. Sky slider not closing properly

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: I have no cabin heat, just blows out cold air. The engine doesn’t overheat and it seems like fluid is coming out of the radiator c

If coolant has to be added more than once per year, there is a leak. To find the leak that exists in your case, and get the required repair estimated, please request an engine cooling system leak diagnostic and the...

Q: How do I get the driver's side window up (the button isn't working)?

Of course I recommend you have it repaired, but I know it is often necessary to get the window up before the repair can be done. How you will get the window up at this point has to do...

Q: Hi so I have a 2004 Jeep Liberty. I just had the ac compressor replaced and now I noticed that once I hit 40mph and let off the ga

Hello there. It's very rare that a new AC compressor would impact the engine's ability to run smooth. This sounds like you are getting an engine misfire on acceleration. You will need to have the ignition system checked to see...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...