Q: My trunk won't shut due to break in attempt

asked by on January 08, 2017

My Trunk Won't shut on my c320 Mercedes Benz 2001 It raddles That's All But won't latch on

My car has 117000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I correctly position the floor mats?
Your car’s floor mats serve an important purpose – they help preserve the carpet and floorboards. However, they need to be correctly positioned to ensure that they don’t become dangers while driving. Here’s what you need to know: Make sure...
Battery light came on while driving
Hello there, a few different faults can cause the vehicle to die like this while running. The most common would be the fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement), battery (https://www.yourmechanic.com/services/battery-replacement), alternator (https://www.yourmechanic.com/services/alternator-replacement), battery cable (https://www.yourmechanic.com/services/battery-cable-replacement), or a wiring fault. I'd recommend you get...
Wheels alignment
Hello. I'll be glad to help you with this. On a straightaway, at speed, with no significant crown on the road, if the car is properly aligned, you should be able to remove your hands from the wheel and the...
My car is sputtering but it's not a blown gasket what else could it be
Hi, thanks for writing in. This could be many different possibilities ranging from fuel delivery issues to possibly a blown head gasket. Without further detail of the symptoms, this may be tough to diagnose without physically inspecting or taking the...
Installed new front calipers on my car and they keep sticking
Check to be sure the mounting bracket (torque plate) for each caliper is not bent and that the sliding bushings/pins on the caliper/torque plate assembly are free and move easily. If you have rear drum brakes, there is a metering...
Can you just replace the clutch on the AC compressor or do you have to replace the whole thing?
Yes you can just replace the clutch pulley on the a/c compressor. The issue that you may have is the pulley bearing seized up and may have spun on the front of the compressor nose cone and will damage it....
vibrate
Hello, thank you for writing in. Typically the brakes will vibrate during and after a stop if there is an issue with the brake pads, rotors, or the caliper guide pins. Start by checking the guide pins, as they are...
Oil pressure gage at zero. No leaks and has plenty of oil. No abnormal noise and temps normal. No low pressure warning light.
The oil pressure gauge will usually drop when a few things could be happening. Either the motor is in fact low on oil, the oil pump could be failing or the oil pressure sending unit (https://www.yourmechanic.com/services/oil-pressure-sensor-replacement) is not working properly...
oxygen sensor
Hi Destiny. Thanks for the follow-up question. A V6 engine has (4) total O2 sensors, Bank One sensor 1, Bank 2 sensor 1, Bank One sensor 2, Bank 2 sensor 2. Bank 1 and Bank 2 refer to different sides...

Related articles

Symptoms of Bad or Failing Trunk Lift Support Shocks
Common signs include the trunk lid being hard to open, not staying open, or not opening at all.
How to Replace a Lost or Stolen Car Title in Washington
Have Have you recently gone on a hunt for your car title only to come up empty-handed? Well you're not alone. Plenty of people each year lose their car title, damage it, or even have it stolen. This car title...
How to Replace a Coolant Vacuum Valve Switch
A vacuum line attaches to the vacuum switch in your car as part of the engine’s heating and cooling system. A faulty switch can break your heater.