Q: Instrument Cluster Lights Come on and Off

Like all other cars on the market, the Ford Fusion requires a break-in period when purchased new. This is a relatively short period during which you need to drive under certain conditions and avoid some types of behavior in order...

Hi there! The squealing sound could be a serpentine belt that has been stretched out, causing it to lose traction against the pulleys on your engine. For this and all of your other symptoms, I would recommend having your vehicle...

Hi there. It would be really hard to say what it will cost to fix and how long it will take without knowing first what is going on. This light can come on for a number of reasons, some of...

Hello there, many faults will cause your 2005 AWD malfunction light to be on in your 2005 Ford 500. The most common faults are the shift linkage, low fluid level (https://www.yourmechanic.com/services/transmission-fluid-service), or a wiring harness fault. A qualified technician, such...

Many of the 1998 Accords were recalled by Honda for ignition switch and interlock defects. In your circumstance, the first thing to do is confirm whether applicable recalls affecting your vehicle were in fact completed, by you or any prior...

Your vehicle is probably covered by GM's 5 year, 100,000 mile Powertrain Warranty. Consequently, you may be entitled to a free warranty repair of this thermostat issue, which issue by the way is not particularly unusual and so the dealer...

Hello, thank you for writing in. The air temperature coming through the vents has more to do with where the air is coming from. If the heater is running it will be passed along the heater core and pushed into...

Hi there. The best way to clear any stored error codes in your ECU is to have one of our professional mobile mechanics come to your location and complete a check engine light inspection (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) using a professional digital scanner....

The fan is operated by a thermostatic switch and a relay or control unit, so there are several components in the chain that could fail. Diagnosing a fan that isn't working is a matter of doing a point to point...