The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
I wouldn’t jump the gun and replace O2 sensors yet. When the engine is cold and first starts, the O2 sensors are not used until they warm up. A poorly running engine, and/or exhaust leaks, can cause false O2 codes....
The engine oil used for summer is typically thicker. Thinner oil in the winter allows it to warm up quicker and lubricate sooner. Thicker oil will take longer to warm up and perform its duties. Your vehicle may only want...
Steering wheel vibration can be caused by a few different issues or components. If the front tires are out of balance, the imbalance will cause a vibration typically felt and seen in the steering wheel. If a tire is out...
There is one thing I don't think you have listed or have checked. That would be injector pulse. You can have fuel pressure but without injector pulse from the ECU, the injectors will not open and the cylinders will not...
Hi there, thanks for writing in. Typically when all of the gauges on the dash are malfunctioning, it's usually the electrical relay (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-electronic-control-relay) as opposed to a fuse. The best way to know for certain is to contact one of...
Hi there. Check the fuse box and see if any fuses blown out when replacing the low beam indicator. If all of the fuses are in good shape and work, then check the wires on the switch and see if...
If you are having any problems or concerns with your vehicle. I would always recommend starting out with a vehicle inspection. This inspection will go over your brakes, suspension, tires, fluids, belts, hoses, and other components as well. Consider YourMechanic...
Hi Nicholas. Thanks for contacting us today. Although I'm sure your clutch driving skills are great, it's quite possible that the clutch itself is the source of your problem. Most of the time when an engine falls flat while releasing...
There is a few tests that should be done for the engine noise and the first is to find out what cylinder is not working and doing a compression test to see if the noise is a stuck open valve...