Q: How do I use the mist wipe feature?

asked by on

How do I use the mist wipe feature?

The mist wipe feature provides extra visibility when your windshield is temporarily damp, such as when you drive through a misty patch. To use the mist feature, push the Windshield Wiper level down and immediately release.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use the mist wipe feature?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: airbag light on

Hello there, thank you for asking about your 1996 Ford Explorer. The code 12 is for a low voltage in the air bag module. The module has an internal fuse that will blow if there is a failure in the...

Q: Blower motor made strange noise and then stopped working

I believe it is certainly an issue they should have fixed if a recall was indeed issued for this exact issue. 40k miles can easily be driven in as little as two years, so there is no reason that the...

Q: The defroster will not blow warm air in a 2007 Ford Mustang.

This is going to be caused by a problem with the temperature blend door and mode door to the defrost is not opening to get warm dry air. You may have a broken door inside the evaporator heater case and...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...