Skip the auto shop - Our mechanics make house calls

Q: How do I replace the cabin filter?

asked by on

How do I replace the air conditioning filter?

To improve the quality and efficacy of your air conditioning system, you should replace the filter with some regularity. This can be done from inside your vehicle, with just a few steps:

  1. Open the glove box.

  2. Remove the damper by sliding it off.

  3. Push in both sides of the glove box until it disconnects. Remove the box.

  4. Locate the air filter cover, and remove it.

  5. Remove the filter.

  6. Replace the old filter with a new filter.

  7. Put the glove box back in place.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: When I turn on the car, is cold and I turn on the AC and I acceletare the can make rattle

This is a common sound when the AC compressor clutch is going out. This can happen for a number of reasons. The noise you are hearing may also be a worn out idler pulley, a squeaky belt, or the compressor...

Q: Car revved & lurched over curb while foot was on brake

Hello there, issues like this are very uncommon. When the vehicle does not stop like this it obviously makes the vehicle unsafe to drive and is a cause for concern. The most likely causes of this would be something obstructing...

Q: What do I do if the temperature gauge moves into the red?

Your Accord is equipped with a temperature gauge that shows you how hot or cold the engine coolant is. During normal operation, it should stay in the middle of the range. If it moves into the red, though, you need...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.