Q: How do I partially turn off the electronic stability control (ESC)?

asked by on

How do I partially turn off the electronic stability control (ESC)?

To partially turn off the electronic stability control (ESC), briefly press and release the “ESC Off” switch on the instrument panel. The ESC Warning Light will illuminate to let you know that the system is partially off.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I partially turn off the electronic stability control (ESC)?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: How do I deprogram the memory feature?

The memory feature can be deprogrammed from your transmitter with just a few steps: 1. Press the button you wish to program, and hold it for about five seconds. You will hear one tone after 1.5 seconds, and another after...

Q: How do I use the temperature control?

The temperature control knob is located in the climate control cluster, on the center console. The knob controls how hot or cold the air coming out of your vents is. If you turn the knob counter-clockwise, the air will get...

Q: I have a 2006 dodge magnum 2.7L V6 I replaced the alternator it’s brand new but car only turns on when I jump it , after about a m

Hi Larry. Thanks for contacting us today. The job of the alternator is to power the vehicles electrical components after the vehicle has been started. It also charges the battery once the engine is started. However, there are multiple components...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...