Ok so when i turn the key to start position absolutely no...
Responses
BrianC115
248 days ago
Hello this is Brian I hope I can help. Can you please provide me with a VIN?
Customer
248 days ago
1fmfu18lxvlb22210
BrianC115
248 days ago
Thank you. So you can jump the starter solenoid and the [engine](/topics-engine-ford/) starts right?
BrianC115
248 days ago
Thank you. Give me a few minutes so that a can pull up your vehicle.
Customer
248 days ago
everything else works on the truck just nothing when I turn the key to start positionOk
BrianC115
248 days ago
Can you check the 175A fuse under the hood it states it located at the right rear of the engine compartment. Also sheck fuse 20 which is a 50A fuse
Customer
248 days ago
Ok my roommate just took it to the store he should be back in just a couple min
BrianC115
248 days ago
Ok take your time Ill be on till 5.
Customer
248 days ago
K thanks
BrianC115
248 days ago
No problem
BrianC115
248 days ago
I hope that worked let me know if you have anymore questions. Have a great weekend
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
How do I adjust the head restraints?
Adjusting the head restraints is an important safety and comfort feature. Head restraints make you more comfortable in your seat, and they also protect your head and neck in the event of an accident. Both the front and rear head...
What does the Oil Pressure Low – Stop Engine message mean?
The Oil Pressure Low – Stop Engine message appears when the oil pressure switch, which is located on the engine, has detected low oil pressure. Low oil pressure can be caused by a number of things including a low oil...
Nissan Altima rumble
The rumbling is caused by an imbalance problem with one of your axles or one or more of the tires. Even though you had the tires balanced, that does not mean your tires do not have a balance issue at...
Brake pads, discs, and sensors replaced
Hello. Your vehicle has sensors that are installed into certain brake pads which alerts the driver when the brake pads are worn down (https://www.yourmechanic.com/article/symptoms-of-bad-or-failing-brake-pads) to a certain point. These sensors need to be replaced whenever the brakes are done. They...
Car runs with the mass airflow sensor unplugged. If you plug it in it will die if the car is running.
This is a sure sign of a shorted mass airflow sensor. The reason it starts with it off is the computer sees no mass air signal and replaces it with an internal memory fake signal to use. This will let...
My car is vibrating - 2005 Jeep Liberty
Hello. If your vehicle is making noises I would start by trying to identify where the noise and vibration are coming from. Noise and vibration, even at low speeds, can be caused by many things not all of them transmission...
My car has a misfire on cylinder 5 and a ticking sound
A failing coil (https://www.yourmechanic.com/services/ignition-coil-replacement) will generally not make a ticking sound, however a failing or intermittent coil may cause the motor to run sluggish a bit if the misfire continues to happen. As you may know, an ignition coil is...
Interior trunk release won't open trunk.
Hello, thank you for writing in. The vehicle uses an electric trunk release, and is likely having an electrical issue. There is a fuse to check and make sure it is good. After that you are in a position to...
I just a BMW X6 and I want to know the ideal grade of gas I use in the car
Use at least 91 Octane fuel, commonly known as premium. Modern vehicles have knock sensors so you might be able to use as low as 89 octane but 91 octane is preferred. If you have further questions or concerns, do...
Browse other content
Maintenance
Services
Cities
Ok so when i turn the key to start position absolutely nothing happens but everything works has power and it will start if you jump the cilinoid Mechanic's Assistant: Is the car in "Park" or "Neutral?" Do you know if your ...
Ok so when i turn the key to start position absolutely nothing happens but everything works has power and it will start if you jump the cilinoid Mechanic's Assistant: Is the car in "Park" or "Neutral?" Do you know if your car has a "wheel lock" feature? Yes I've tried it in park and neutral wheel does lock but it was starting just fine Mechanic's Assistant: What is the make/model/year of your car? Ford exspodition 97 Mechanic's Assistant: What year is your Expedition? 97 Mechanic's Assistant: Are you fixing your Expedition yourself? What have you tried so far? Cilinoid [starter](/topics-starter-ford/) batt everything but the ignition switch basically Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? No thats it