My trans cooler went bad getting water in the [transmissi...
Responses
Keiphun Sowell
273 days ago
Hello, My name is \*\*\*\*\* \*\*\*\*\* i will be assisting you today. Thanks for allowing us to assist you with your questions or concerns.
**You may receive a call request from the automated system. This is not required for me to assist you. But if you struggle with text a phone call would be the best option.**
**If you have any additional questions on this issue please let me know. The only bad question is the one not asked.**
Currently reviewing your information to see if there is anything else I may need to know. Please allow 5 minutes between replies.
In the mean time may i ask with whom do i have the pleasure of speaking with?
Hello, It is a pleasure to meet you.
Sorry to hear about your issue.
Would you happen to have a scan tool to pull the code the computer has stored? Thanks
Customer
273 days ago
Nope but I'm tired of the texting, if we can talk it be betterWhen truck goes I to lime a limp mode when it quits pullingPut it in neutral I can rev it up then put in drive an when it goes in to 3rd from 4th it will pull again an take gas
Keiphun Sowell
273 days ago
Sorry I am not available for a call request at the moment.
It sounds like the 1 and 2 clutch packs are worn and likely needs to be replaced.
Customer
273 days ago
What does the #1 & 2 clutch plater
Do?
Keiphun Sowell
273 days ago
That’s what engages when you are in 1 or 2 gear.
Customer
273 days ago
I have no promblem getting into 1st 2and an 3rd
Keiphun Sowell
273 days ago
Okay I mis read the question. This issue would be the 4th clutch pack.
Customer
273 days ago
Will that fix it going into 4tg 5th an 6th
Keiphun Sowell
273 days ago
Is the check engine light on?
Customer
273 days ago
but every light there is is on, an the center it shows a wrench
Keiphun Sowell
273 days ago
Could you get the codes for me?
Customer
273 days ago
How di I do it
Keiphun Sowell
273 days ago
With a scan tool.
Customer
273 days ago
I don't have one, who has it
Keiphun Sowell
273 days ago
You can stop by your local part store. They will pull the codes for free.
Customer
273 days ago
Ok I was working todaycdidmt have time I will in the morningNone of the parts stores will run the codes, an I. CAnt get it to a dealership, I'm trying to find someone
Keiphun Sowell
273 days ago
Why won’t they run the codes? That’s weird.
Customer
273 days ago
They said because. Of covid, but I'm gonna see a neighbor of mine this evening
Keiphun Sowell
273 days ago
Okay, Please follow up with the codes when you get them. Thanks
Customer
273 days ago
I'm disconnected from radiator with the transmission lines an I've disconnected water lines from the original trans cooler that was in front of radiator, my radiator lines goes to a trans cooler I added, so tell me how am I still mixing, water in transmission an transmission fluid in radiator
Keiphun Sowell
273 days ago
Hey. Will follow up ASAP. Thanks
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Truck makes loud noise when accelerating.
Hello. There are multiple things that may cause loud noises when stepping on the gas pedal such as axles, valve lifters, and catalytic convertors. I suggest you have a technician inspect the vehicle since there are several things that may...
1990 Porsche 944, starts well, shuts off after a few minutes
After checking for the proper fuel pressure, have an experienced technician inspect the ignition systems, crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) and distributor pickup coils. A malfunction here will cause a stall, as these devices help the computer determine when to send...
difficulty factor replacing thermostat and censor for a 2012 Chrysler 200. do I need to drain the radiator
Hello there, thank you for asking about your 2012 Chrysler 200. As long as you reduce the coolant level below the area you will be working in, you don't have to completely drain the coolant. However, be sure not to...
Keeps overheating and I've already got the radiator flushed and the replaced the thermostat
Hi, thanks for writing in. You will need to have the cooling fan clutch checked to see if it is working properly. The engine will not cool properly if the clutch is not locking enough as the engine gets hot....
Car stalled and would not start - 2013 Ford Fusion
Hi there. This could be a concern with the push start button itself. While the push start button has been around for a short while, it's still not a perfect option. This option is taking the place of the mechanical...
Check engine light came on and got a code p0015. I didn't notice anything while driving.
Hi there. When getting the code P0015 (https://www.yourmechanic.com/article/p0015-obd-ii-trouble-code-camshaft-position-b-timing-over-retarded-bank-1-by-jay-safford), the main thing to check is to verify the operation of the Variable Camshaft Timing (VCT) solenoid. This solenoid is operated by the oil pressure in the engine. If the oil in...
WHY IS WHITE SMOKE COMING FROM EXHAUST.??
Keep in mind there are several "classifications" of white smoke (https://www.yourmechanic.com/services/smoke-from-engine-or-exhaust-inspection). If it is thin and dissipates quickly you should not be majorly concerned. Most white smokes are a sign of coolant being consumed and burned in the engine. This...
How much will it cost to replace CV Joints or struts on 96 Saturn?
Hi there. The clicking or popping sound when turning is the sound of the outer ball joint in the CV Shaft that is emitting the sound. The joint is either worn or out of lubrication and trying to seize up....
My car has been making a rattle noise.
The heat shield is designed to keep the engine at a specific temperature. I recommend leaving the heat shield on but fixing it to where it does not vibrate. Look for any cracks or broken bolts to see if the...
Browse other content
Estimates
Maintenance
My trans cooler went bad getting water in the [transmission](/topics-transmission-ford/), still trying g to remove pepto bismol out of it, it won't shift out of 3rd, if it does go to 4th it's like neutral ,wont pull until it's in ...
My trans cooler went bad getting water in the [transmission](/topics-transmission-ford/), still trying g to remove pepto bismol out of it, it won't shift out of 3rd, if it does go to 4th it's like neutral ,wont pull until it's in 3rd gear, do u think it needs resetting, dash shows a wrench an says see manual Mechanic's Assistant: Has the clutch been slipping? Are you having any trouble shifting? It been shifting fine before the water got in it, now it does shift at all hsrdly Mechanic's Assistant: What is the make/model/year of your transmissions? 2016 ford f150 5.0litre, 152000 miles, el sing cab Mechanic's Assistant: Are you fixing your F150 yourself? What have you tried so far? First I was told radiator bad , bought new one 300bucks paid guy 200 to put in , didnt stood it. Next I was told to buy trans cooler an do away with the one inside radiator, well that didnt work, then I found trans cooler outside between radiator an [engine](/topics-engine-ford/) order 200 new one yesterday an plugged old one off t Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Just can I reset it or do I need to flush it some more or what done spent 1200 an haven't fixed anything g yet