I have an 09' enclave. was wanting to know how to diagnos...
Customer
I have an 09' enclave. was wanting to know how to diagnose a [brake](/topics-brake-ford/) problem. can't find any visual issues or problems. how do you test master cylinder
...
I have an 09' enclave. was wanting to know how to diagnose a [brake](/topics-brake-ford/) problem. can't find any visual issues or problems. how do you test master cylinder
Read More
Responses
Mechanic01
264 days ago
Automotive Expert
Hello and thank you for using JustAnswer. My name is \*\*\*\*\* \*\*\*\*\* I will do my best to assist you.. I help many customers, so sometimes my replies are delayed, I will respond once available. During this conversation you will be given an automated offer for a phone call. You may accept or decline that offer.I don’t personally offer this service so if you take this another tech may call.
What problems are you having?
Is there a brake or abs light on ?
Customer
264 days ago
the brake light has came on once. stabilitrac comes on from time to time. there is a shake every time the breaks are applied. like a warped rotor but I can't see that it is when taken off
Mechanic01
264 days ago
Automotive Expert
you wont be able to see a warped rotor, you will just need to replace it.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Strange noises are always concerning on a vehicle, but especially so when the noise you hear is coming from your brakes. With the limited information provided, it is difficult to determine exactly what is causing the noise without hearing it....
You are correct about needing an ECU and possible a new transmission. Your vehicle may be covered by a recall from the manufacturer. The recall is T-CP-2TC. You will need to contact your dealer to see if your VIN is...
It would seem the issue is a connection problem. If the wire from the windshield to the radio has been cut or pinched, it could be a short causing your radio to not function at all. There are ways to...
Hello, thanks for your question. I would consider 3 mm to be the thickness that I would recommend for replacing the brakes. Some vehicles start out thinner than other vehicles, but under 3 mm is what most mechanics would consider...
Hi and thanks for contacting YourMechanic. It takes the dealer about 1 hour and 25 minutes to replace the oil pan gasket. However, it all depends on what type of experience the person has in removing the pan and gasket...
Code P2096 stands for Post Catalyst Fuel Trim too Lean Bank 1 and code P2196 stands for O2 Sensor Stuck Rich Bank 1 Sensor 1. My guess is that the upstream O2 sensor has failed causing a false rich condition....
Hello. Thank you for writing in. The issue sounds like it is related to the transmission, and it may be electrical or mechanical. More specifically, it may be related to the torque converter. The torque converter has a solenoid in...
Hello. The OnStar system is wired to receive a wide variety of inputs so that immediate assistance can be provided in the event of an accident. For this reason it may very well be possible that the system is tied...
Hi there. In most cases, when you hear a constant squealing noise while driving it's due to a serpentine belt that has become loose and need to be replaced (https://www.yourmechanic.com/services/serpentine-drive-belt-replacement). It could be a different belt, pulley or the power...
I have an 09' enclave. was wanting to know how to diagnose a [brake](/topics-brake-ford/) problem. can't find any visual issues or problems. how do you test master cylinder ...
I have an 09' enclave. was wanting to know how to diagnose a [brake](/topics-brake-ford/) problem. can't find any visual issues or problems. how do you test master cylinder