Q: engine vibration at idle 2012 Dodge Charger
hi good morning i have engine vibration at idle i cleaned the fuel injector still there is a engine vibration at idle any ideas
My car has 80000 miles.
My car has an automatic transmission.
Hey there. I would recommend taking the vehicle to a local dealer to have the vehicle checked for recalls and also technical bulletins for this engine. There are cylinder head replacement and timing chain replacement recalls that may pertain to this vehicle and the dealer would have to check the VIN of your Dodge.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
What should I know about winter tires and chains?
Driving in the winter requires that you take certain steps to ensure that you’re safe on the road. One of the most important things to do is to make sure that you have the right tires mounted: Mud and Snow:...
How do I properly secure a car seat in the rear seat?
Car seats or booster seats meant for restraining children are either secured via the LATCH (Lower Anchors and Tethers for Children) system compatible anchors or by using the vehicle’s seat belts to secure the seat. Here are a few steps...
How do I add oil to my car?
If your vehicle is low on oil, you can add more. To do so, simply remove the cap to the oil filler, and add a small amount of oil. Check the dipstick to see where the level is, and repeat...
How do I turn the rear park aid feature on or off?
The rear park aid is a safety feature that helps you when you are parking or are in a reverse situation. When in reverse it audibly alerts you of your surroundings, and how close you are to hitting other cars...
Car sputtering and stalling
A clogged fuel filter is a likely cause for your concern, but I would take a look back on your past maintenance as well. A weak ignition system or miscalculated air metering due to a faulty sensor or valve can...
Grinding noise when steering left in reverse at low speeds.
I am working on this
car stalls when cold until warmed up
It may be best to have a certified technician with the proper scan tool look into the check engine light fault (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) as well as the entire system. Sometimes a fault will not set a code, or the code set...
I believe a vacuum leak, maybe head gasket.
Hi there. If your vehicle tends to stall out when all of the vacuum lines are hooked up, then there is an issue either with the air coming into the engine or the combustion is not good enough to keep...
My transmission pops out of gear.
The software update that was performed on your vehicle maybe for a vehicle with a different transmission. Check the version of software that was installed in your car and verify what model that it refers to for your transmission.
Related articles
A Buyer's Guide to the 2012 Lexus IS
If If you haven’t heard of the 2012 Lexus IS, you’re not alone. This sports sedan is incredibly underappreciated. However, that doesn’t mean it’s not worth considering for your next car. Key Features The 2012 Lexus IS can be purchased...
A Buyer's Guide to the 2012 Cadillac Escalade ESV
When When most people think of the Cadillac Escalade, two words generally come to mind: power and luxury. The 2012 Cadillac Escalade ESV is no different. However, with this model, you can throw in another word: efficient. This hybrid carries...
Symptoms of a Bad or Failing Axle CV Shaft Assembly
Common signs include loud clicking noises when turning, grease on the inside edge of the tires, and excessive vibration when driving.
Browse other content
Cities
Maintenance