I'm trying to figure out a way to get a listening device ...


I'm trying to figure out a way to get a listening device to my injectors without removing my manifold. Mechanic's Assistant: Okay, I'll connect you to the Mechanic to go over that information regarding your Chevy. Before I...

I'm trying to figure out a way to get a listening device to my injectors without removing my manifold. Mechanic's Assistant: Okay, I'll connect you to the Mechanic to go over that information regarding your Chevy. Before I do, is there anything else you want him to know? No. I just want to confirm my injectors are failing without getting to deep in nuts and bolts.

Automotive Expert
Hi! My name is \*\*\*\*\* \*\*\*\*\* I will be able to assist you. I’m sorry that you’re having trouble with your vehicle. Don’t worry though, we’ll be able to figure this out. Please understand that I do not know your knowledge or capabilities so I **may** need to ask questions to find out basic information to help solve your specific problem. Sometimes I have to look up some information so it may take a moment to respond. I appreciate your patience. The system will give you an automated phone call offer to speak to one of us on the phone **. It is optional.** Some folks prefer to talk on the phone. If you don’t, please ignore it as I cannot control the offer from popping up. This would be next to impossible to use a listening device on these without removing the intake manifold because there's no access to them anywhere. My goal is to earn a 5 star rating experience. If you have any further questions about this concern, please feel free to reply back to me. If I’m not online at the time, I will respond ASAP when I get back. You’re awesome! Thank you for using JustAnswer!

Thank you, \*\*\*\*\* \*\*\*\*\* solved the problem. The coil pack harness connectors on cylinder 1 and 2 were failing. Upon installation, the copper terminals were pushed back into the plastic housing, and not making contact. 1 and 2 failing, #3 was unable to fire on time, therefire P0300 multiple misfire. A little finesse and I was able to close the circuit.
Automotive Expert
You're very welcome. That's awesome! I'm glad you were able to get it sorted out.

What others are asking

Car won't start after changing the fuel pump and filter
When a vehicle will not start, the mechanic will perform a series of test that are basically a process of elimination. We know that, for an engine to start it must have good compression, spark from the spark plug, correct...
Air conditioning not blowing cold air
When it comes to A/C problems, there are usually a few different reasons as to why the air conditioner is failing to provide cold air in your Nissan Altima. It can be quite challenging to point you in the right...
there some oil dropping down from the acclerator pedal also engine there a noise thought it was exhaust but got that checked out
Hello. Thank you for writing in. The first thing you want to do it's find the cause of the oil leak (https://www.yourmechanic.com/services/oil-fluid-leak-inspection), and make the appropriate repairs. The leak coming from the accelerator is likely coming down that pedal from...
What is usually the ball park figure to have my rear brake pads, rotors, and calibers replaced?
Billing question sent to CS for the cost of parts and labor to replace the brake pads, rotors, and calipers on a 2003 Cadillac DeVille with a V8-4.6L engine.
Strange rattling/tapping noise at low rpm when accelerating lightly
Hi...the noise can be diagnosed by taking all the belt driven accessories out of the picture by momentarily running the engine without the serpentine belt. If the noise remains, then the search is focused on internal engine parts. If the...
Check engine light after repair of alternator and leaky oil valve cover gaskets on a 2006 hyundai Tucson
Any one, or more, out of a list of thousands of OBD-II Diagnostic Trouble Codes could have caused your vehicle's Check Engine Light to illuminate. Even though in your case the check engine light has come on immediately after specific...
Gas smell when car turned off. No leaks or anything 2010 BMW 328i
It sounds like you may have a leak in the fuel tank ventilation system that may be causing the fumes to escape from the fuel tank. This can happen when the venting tubes in the fuel tank are leaking or...
car accelerating but no pull
You may have a clogged fuel filter or the fuel pump is low on pressure and these should be checked as well as the computer scanned for failure codes.
My car bounce under 20 mph and then over 20 mph the steering wheel pulls to the left and car starts to shake after 65 mph
Hi Erick. Thanks for contacting us today. This is a very odd situation you're experiencing, especially if the alignment has been verified as being straight, the tires were rotated and the tires/wheels are balanced - as those are the leading...