My check [engine](/topics-engine-chevy/) light came on an...


My check [engine](/topics-engine-chevy/) light came on and recently started flashing. The service stabilicheck light signal appeared as well I have a Chevy cruise 2017 Mechanic's Assistant: Does the light stay on, or does ...

My check [engine](/topics-engine-chevy/) light came on and recently started flashing. The service stabilicheck light signal appeared as well I have a Chevy cruise 2017 Mechanic's Assistant: Does the light stay on, or does it blink? It blinks Mechanic's Assistant: What is the model of your '17 Chevy? Premier Mechanic's Assistant: Are you fixing your Premier yourself? What have you tried so far? Nothing so far Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? No that’s all

Automotive Expert
Hi, my name is\*\*\*\*\*’ve been a technician on Just Answer since 2007 and I'll be helping you today. I'm sorry to hear you are having difficulties with your vehicle. I know how inconvenient car trouble is, but together, we will get your vehicle back up and running quickly. May I ask whom I am chatting with today?

Olivia
Automotive Expert
Hi Olivia it's nice to meet you. Is the engine running rough? Do you happen to know the codes that have turned the light on?

No lol don't. The engine is fine but the light came on maybe a week ago. Just now on the highway it started to shake and the light began flashing and then the service stabilitek light came onIt's stopped since then but the check engine light remains
Automotive Expert
Ok, it sounds like there is a misfire code stored. This will cause the stabilitrac light to come on and also cause the flashing check engine light. You need to have the codes checked to determine which cylinder is misfiring. Once you have that info, it likely will need to have one of the [ignition coils](/topics-ignition-coil-chevy/) replaced. Most parts stores will check the codes for free if you want to get it and post it here with me. Let me know. Thanks

Is the car safe to driveFor now
Automotive Expert
Yes, the car is safe to drive but you will want to have it looked at as quick as you can.

What others are asking

When I start accelerate, feels like there's an anchor holding the car
Hey there. Without additional detail as to the characteristics of the acceleration it may be difficult to diagnose without test driving the car. You will want to check to see if the acceleration feels more like a jerking or surging...
2005 Liberty V6 cranks but won't start - it also shows various MIL codes
Extended cranking can set the P0522 code for lack of oil pressure. The P0581 code has to do with the cruise control circuit. I wouldn't concern myself with this one until the car is running. It may clear itself at...
Jerking forward at a full stop.
This may be related to a dirty or failing idle air control valve. The idle air control valve reads the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and at...
I have XJ8l 207. I have a ploblem, the battery died on me and the system whet down. I charge the battery, but keeps on loosing power.
Hi there. For the battery to be going dead on your vehicle, there could be a parasitic load on the battery (something on when the key is off). To check this condition, perform the following steps: Remove the negative battery...
How do you activate the horn beep feature on a Ford when using the remote?
Hello. Your particular vehicle should honk the horn only after the second press of the key fob button. On the first press of the button it will just flash the lights. I did find a little information on the topic...
I have a 2010 ford fusion. The check engine light is on. My car jerks while driving. The rpm goes up and down while driving.help?
Hi there. Usually an engine that is displaying these type of symptoms is caused by a fuel system restriction, a vacuum leak or a sensor that has a faulty connection and is causing inconsistent or misfiring cylinders. Since the check...
2005 dodge Caravan overheated air conditioner is blowing heat one of the fans was not working so I replaced it air conditioner sti
Hello, thank you for writing in. If you have not resolve the issue(s) that caused the vehicle to overheat in the first place, then you need to start there. Do so by checking the level of your coolant, the radiator...
Map sensor
Hi Danny. This video is pretty good (https://www.youtube.com/watch?v=5ssv8mH94cs) on showing how to clean a MAP sensor.
Sloshing in my dash and dripping from my dash
It sounds like you may have a leaking heater core. The heater core (https://www.yourmechanic.com/services/heater-is-not-working-inspection) is a small radiator like unit that circulates the hot coolant from the engine through the heater core which then uses this warm coolant to heat...