Q: Check Engine code P128

asked by on October 30, 2017

I have Check Engine Code P0128. Autozone is telling me that it is my Coolant thermostat sensor. Others are telling me it could be the whole thermostat needing replaced. Is there any way to know which before ordering parts?

My car has 70000 miles.
My car has an automatic transmission.

the most common cause for this code is the thermostat replacement. The computer expects the engine to get to a temperature within a set amount of time and a stuck open thermostat will cause it not to reach operating temperature.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Battery over charging new alternator new voltage regulator and new battery

Hey Joe. Thanks for sending the question today. When an alternator is reading higher than it should, there are three possible sources. Either the ECU which controls the production of the alternator is damaged, the alternator itself has an inner...

Battery light is on

It sounds like your vehicle has a voltage problem, which is often associated with a bad voltage regulator. When the voltage regulator is not working properly, this may result in the alternator allowing too much power to be delivered to...

Why would my speedometer drop to 0 in my 2001 Hyundai Santa Fe

Hello. Typically when the speedometer just stops working like that it is due to a failure in the vehicle speed sensor. If the sensor is failing or if it is making a poor connection then the speedometer will act like...

Does your Audi battery replacement include coding the battey management system?

Hi there. That is a very good question. This would depend on the scan tool or other diagnostic equipment required to perform the coding. Customer service may need to verify that this service can be performed by the technician that...

P2096 and P2196 Codes?

Code P2096 stands for Post Catalyst Fuel Trim too Lean Bank 1 and code P2196 stands for O2 Sensor Stuck Rich Bank 1 Sensor 1. My guess is that the upstream O2 sensor has failed causing a false rich condition....

Check engine light

Hello. If the harnesses do not match then the sensor you have is incorrect. A search on my end also reveals that your vehicle uses a four wire sensor, however if the harness on the vehicle uses a 2 wire...

Steering wheel vibration over 60 mph

Hello. This vehicle should not shake like this when driving at high speeds. If it only occurs at higher rates of speed then it either has a warped front hub assembly or it may have a problem with the alignment....

How do I disable the Trailer Sway feature?

Your truck comes with a Trailer Sway feature. This feature helps ease trailer sway when towing an object. To disable the Trailer Sway feature. Press the Setup button until you see Trailer Sway. Press the Reset button to turn...

Related articles

Understanding the Chrysler Oil Change Indicator and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Chrysler Oil Change Indicator lets you know when and what service your car needs.
The Best Used Cars to Buy If You’re an Interior Designer
As As an interior designer, you need to transport a great many different items, including fabric, paint and wallpaper samples and sometimes even furniture items. You probably don’t handle overly large loads very often, and when you have to, you’ll...
A Buyer’s Guide to the 2012 Chrysler 200
In In 2011, Chrysler completely overhauled, updated, and remodeled their entire line, including the introduction of the new Chrysler 200. This reimagining of the old, boring Dodge Sebring sedan was already an exciting move for Chrysler, and the 2012 Chrysler...