1. Home
  2. Advice
  3. Tags
  4. Chrysler

Showing articles & questions for topic

Related articles

Understanding the Chrysler Oil Change Indicator and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Chrysler Oil Change Indicator lets you know when and what service your car needs.
How to Customize a Chrysler 300
The Chrysler 300 is an extremely popular model of sedan with sleek styling reminiscent of more expensive brands like the Bentley at a far more affordable price. It’s a...
Chrysler Certified Pre-Owned (CPO) Car Program
If you are shopping for a used Chrysler vehicle, you may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is...
How to Get Chrysler Dealership Certified
Chrysler car dealerships offer automotive technician jobs to mechanics who are certified through the MOPAR CAP (Career Automotive Program).
A Buyer’s Guide to the 2012 Chrysler 200
In 2011, Chrysler completely overhauled, updated, and remodeled their entire line, including the introduction of the new Chrysler 200. This reimagining of the old, boring Dodge Sebring sedan was already an exciting move...
A Buyer’s Guide to the 2012 Chrysler Town & Country
While the Chrysler Town & Country has been in production for over half a century, the 2012 Chrysler Town & Country is anything but old-fashioned. The model got a huge overhaul...
A Buyer’s Guide to the 2012 Chrysler 300
The Chrysler 300 is a large luxury sedan that looks great, handles well, and has more power than many realize. Chrysler was once one of the biggest automakers in the world, and with...
A Buyer’s Guide to the 2012 Dodge Ram
While Chrysler has decided to give Ram its very own division, it seems impossible not to think of the Ram 1500 as a Dodge. After all, you’ll still buy your 2012 Ram at...
2012 Chrysler 200 vs. 2012 Chevrolet Malibu: Which One Should I Buy?
When you are looking for a small-range sedan, you need to get somewhere quickly and inexpensively, and may even need to take a few kids with you. Slightly larger than a commuter car, these mid-size options offer decent...
The Best Used Cars to Buy If You’re a Massage Therapist
If you're a massage therapist, one of the cornerstones of your business has to be that you don’t keep your clients waiting. That means you need a vehicle that’s reliable. You...
The Best Used Cars to Buy If You’re an Interior Designer
As an interior designer, you need to transport a great many different items, including fabric, paint and wallpaper samples and sometimes even furniture items. You probably don’t handle overly large loads very...
The Best Used Cars to Buy If You're Over 50
Shopping for a car when you’re over the age of 50 begins to shift a bit, as your priorities tend to change. Suddenly it’s not so much about what the vehicle...
The Best Used Cars to Buy If You Get Motion Sickness
For people that suffer from motion sickness, even on the shortest car trip, riding in a vehicle can prove to be unbearable. What’s great is that there are a number of cars...
The Best Used Cars to Buy If You're a Rock Climber
If you’re a rock climber, you want a vehicle that gets you where you need to go, even if the terrain gets rough. You may be living out of your vehicle at...
The Best Used Cars to Buy If You’re a Caterer
If you are in the catering business, you need a reliable vehicle that will provide you with what you need to transport your food, linens, and other supplies. Generally speaking, you're better off...
The Best Used Cars to Buy If You’re a Vet
The best car for a vet to own largely depends on the type of practice he or she has. Large animal vets are probably going to want something that delivers a fair...

Related questions

do the axles need to come out of a 2007 aspen when doing the rear brake shoes?
Hi Jonathan. Thanks for contacting us today. The problem with buying used parts is that they often are less than complete, so it's not a shock that the used axle you purchased has been altered. In regards to having to...
needle on temp gage keeps raising
If you detect the odor of engine coolant, there is likely to be a leak. The leak could be really tiny, as the sense of smell is very good in most people. The heater core, in the dash, can leak...
I have a 2004 Chrysler Concorde. There was a pop when I turned wheel and now wheels won't turn but steering wheel turns.
A break or failure in any component in the steering "link" could account for the failure. That includes the coupling from the steering shaft to the rack and pinion assembly, the rack and pinion unit, the inner and outer tie...
Car is completely shutting off then restarting a few mins after
The noise should be pinpointed, in case it is relevant to the stalling. There are many causes of stalling but a few possibilities are a faulty mass airflow sensor, faulty engine coolant temperature switch/sensor (typically at cold start only), faulty...
My 2008 pt crusier didn't pass smog because of the OBD 2 does that mean the car is not good
If the check engine light was on during inspection OR the inspection "readiness monitors" in the OBD-II system were not complete, sometimes the issue can be quite simple, indeed as simple as a loose gas cap. Before drawing any conclusion...
What could it be
I would suggest having the alternator checked to determine if it is receiving the proper amount of voltage from something called the voltage regulator. The voltage regulator regulates the charging voltage that the alternator produces, keeping it between 13.5 and...
I replaced wheel speed sensor. But abs and engine light still kn. What could it be
If the ABS wheel speed sensor was faulty, once the new hub/sensor is installed, and you drive the vehicle, the warning lights should go out. To determine what is going on, you can manually erase the trouble codes using an...
roughly, what would it cost to repair a clock spring in steering column---chrysler pt cruiser 2008
If you telephone customer service at 1-844-249-6752 you can obtain an exact quote. To my knowledge, for your specific make and model it takes about 1 hour to remove and replace the clockspring. The clockspring itself sells for "roughly" $150....
What could cause a popping noice when I hit the breaks?
The noise could be caused by too much rotor runout, the rotors might have thickness variation, brake parts could be loose (improperly torqued), and/or bushings could be worn. If you request a vehicle noise diagnostic - brake noise, the responding...
Car turned off on drive and won't turn back on
Thank you for your question. The rack and pinion steering gear unit on your vehicle is bolted to the frame of the vehicle. There is no connection between the steering gear and your vehicle's transmission. Your car uses an electronic...
My my 01 pt cruiser died while in reverse backing up what could cause this?
There may be a couple different causes and would first need to see if problem was caused by the transmission or the engine. Have the transmission and engine scanned for stored codes to see if there is an internal transmission...
What's the average cost of replacing a bent connection rod?
A bent connecting rod does not just happen and may have been caused by a timing chain problem and the valves got bent when they hit the piston and may have bent the rods. You would need to have the...
2007 Chrysler Sebring loses power at right turns, rare occasions
If all future instances of stalling are on right turns, and none are on left turns, a possibility is a chafing wire harness that only comes into play on right turns. Does the car stall at ANY stops (traffic lights,...
my car sputter when driving had the crankshaft positions sensor done but still doing the same thing had it tested and code was p03
OBD-II trouble codes, such as P0344 in your circumstance, do not constitute a diagnostic or identification of specific failed parts. To determine if the cam or crankshaft position sensor is actually faulty, versus a situation where perhaps the circuit to...
Do I need a second opinion?
If you are not getting a computer signal to the injector then the wiring from injector to computer will need to be checked first and if it is good then the computer will need to be replaced.
I just had my alternator fixed and when driving this morning during daylight my headlights where on turn off and interior brighten
Hi Deon. Thanks for contacting us today. At first glance, I wouldn't suspect the replacement of the alternator is related to the current issue you're having with the interior or exterior lighting. Issues like these can be very tricky to...
I recently bought a 2016 Chrysler 200 and I just got a tune up. Everytime I stop my car,it jerks BAD!
If the jerking is occurring as you are slowing, but not yet fully stopped, it might be due to abrupt shifting in the transmission. However, if the jerking occurs after you are totally stopped, the fault is usually caused by...
When you put the car in drive or reverse it starts running rough and the engine acts like it's going to dies then the car shuts o
Stalling, or stumbling, when the vehicle is put in gear simply occurs if the engine cannot accommodate the load. Among the potential causes of that are faults in engine controls. A mechanic can test the electronic throttle controls, as well...
Car shakes and wants to turn off
Without further testing it may be an ignition problem misfire or a more serious problem with a blown head gasket.
The other day my car kicked and now out whistles and the acceleration has been cut in half i don't know what has caused this
You may have a bad turbo or the inlet hose to the turbo. Have this checked and also scan the computer for stored codes and get them diagnosed.

Need a mechanic?

Our certified mobile mechanics make house calls in over 700 U.S. cities. Fast, free online quotes for your car repair.

Get a quote

Post a question and get free advice from our certified mechanics.

Ask a question