Hey there. If the line is broken, then it has to be replaced. The line is a special transmission cooler line. You may need to use dealer supplied parts for this repair only. The transmission should not be tried to...
Hey there. The turn signal switch is disabled by the hazard switch. You should make sure to turn on and off the hazard switch and then test turn signals to see if they work properly. You may need to replace...
Hello. The fuel injection pump has an electrical fuel cut off valve that may be cutting off the fuel and is not replaceable on some injection pumps. You may want to check-in with your local Mecerdes mechanic to check the...
Hey there. Your fuel pump may have a heat related failure and needs to be cooled to get it to work. The pump is in the fuel tank and needs to be tested first by a mechanic to see if...
Hey there. The condenser is blocked or the expansion valve is stuck causing the problem. Make sure when testing you have proper air flow across the condenser. If the fan clutch is not working good then the pressures will be...
Hello - wow, an older classic! Your 300TE utilizes Bosch Continuous Injection System (CIS) which varies fuel pressure more dynamically than more contemporary injection systems. I would suspect fuel pressure is the problem, both for the inability of the engine...