Q: Balance shaft belt

It sounds like there is an issue with your accelerator cable. It is possible that it may be broken or has come detached from the throttle of your engine. I would recommend that you enlist the help of a certified...

The elapsed time is viewable in the multi-information display above the center console. To view the elapsed time, press the display button until the multi-information display shows elapsed time. This feature will show you how much time has passed since...

Hi there. When this transmission starts sticking in gear like this it is typically the first sign of an internal transmission failure. The solenoid pack should not have to be installed prior to checking the transmission pressures to see if...

Hi there, thanks for writing in. I'd be happy to offer my insight. I'm curious as to your vehicle's motor size. There are four different motors available in your Cherokee, each with their own set of issues. I would say...

Most likely the harmonic balancer is not the reason for why the car is overheating. It is more likely something to do with the cooling fan or a part of the cooling system, such as the thermostat. I recommend having...

Hi there. Most of the time, engine knocking or ticking is caused by low oil levels, metal to metal contact, or a belt that is loose or broken. A quick check you can perform is to check the oil level,...

Hi there, replacement of the CV joint, axle and hub assembly required a certain amount of disassembly and reassembly of the suspension on that side of the vehicle. It is possible that this process caused a realignment of some suspension...

When the engine is cold, the engine coolant temperature sensor must be working properly to signal the PCM to enrich the mixture on cold start. If there is a fault with that sensor, you can experience rough idle idle as...

Hi Anil. Thanks for contacting us today. P0141 is the OBD-II generic code (https://www.yourmechanic.com/article/p0141-obd-ii-trouble-code-o2-sensor-heater-circuit-malfunction-bank-1-sensor-2-by-jay-safford) indicating the Engine Control Module (ECM) has tested the O2 sensor heater circuit and detects a problem with the bank 1 sensor 2 oxygen sensor heater...