Q: Back window fell.

asked by on

My back window has fallen.

If your window has fallen, the problem is likely with the window regulator or track. A qualified technician, such as one from YourMechanic, can removed the door panel to diagnose and repair your window problem.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Back window fell.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: My car is throwing the code p0707 which means transmission range sensor I had another transmission put in same code

Hi, thanks for writing in. The transmission range sensor switch must be physically aligned with the gear selector in order to work properly. This generally involves putting the shifter in the Neutral position, then adjusting alignment of the range sensor...

Q: How difficult is it to replace the radiator in a 07 X-Type Jag?

In order to verify the leak you will need to have the cooling system pressure tested to see if it is just a hose or the radiator is leaking. This way you do not replace good parts. You may have...

Q: Q: Car window is off its track

It is not uncommon for windows in Honda’s to come off their track. The doors are fairly light and are subject to being slammed shut sometimes a bit harder then they should. I myself own a Honda and have been...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...