Q: 2008 Acura Swab links replacement. How much ?

asked by on

Swab Links replacement. How much it costs ?

My car has 100000 miles.
My car has an automatic transmission.

Hi Krupali. Thanks for contacting us today. If you’re needing the stabilizer bar links replaced (sway bar) on your Acura, and looking for an estimate, please click this link to request a quote. Thanks.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. 2008 Acura Swab links replacement. How much ?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: 05 acura tl automatic will not accelerate and move. rpm going wild and revs. what is the cause?

The first thing to do is to see if the transmission fluid is full? If it is full, then you may have an internal transmission problem and will need further diagnosis to determine the cause by a transmission mechanic like...

Q: My dealer told me that I should replace the oil pump along with the timing belt

Hi There, There are a number of differences between the oil pump and the water pump, however the main difference is that the water pump pumps the coolant through the motor and is driven by the timing belt and the...

Q: Check Engine Light is on the code is coming as p0740

The DTC P0740 is for a "Problem in Lock-up Control System". This code means that there is most likely a problem within the transmission. It could also possibly be caused by a wiring issue or a control module. It would...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...