Q: 2005 chrysler 300C code 0480

asked by on

Flashing code 0480 what's problm

My car has 111000 miles.
My car has an automatic transmission.

The most common cause for getting code P0480 on this car is the cooling fan has a problem and should be checked for proper operation and replace electrical cooling fan and fan relay as needed.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. 2005 chrysler 300C code 0480

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: I need a thermostat replacement, will they automatically do the coolant flush?

The cooling system is recommended to be flushed out anytime the thermostat is replaced if the coolant has not been changed or flushed recently. A thermostat does not always require the coolant to be flushed out and would be an...

Q: Hey I have a chrysler300 2009 touring I have a p0301 and wen my car runs for a while it won't crank back up till it cools down

Hello, thank you for writing in. The vehicle's cooling leak may be causing the misfire. The leak needs to be repaired first, and then we can take any other issues from there. The starting problem may also be the vehicle's...

Q: AC blows warm air, refrigerant was recharged.

Hi there. When the refrigerant was recharged, was the system evacuated and a vacuum test performed to ensure there are no leaks or moisture in the system? It sounds like the AC compressor may not be engaging. A blown fuse,...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.