Popular questions

Hello. The P0442 error code is an evaporative emission control code and is an indication of a small leak being detected in the evaporative emission system. There are usually no visible symptoms of this error code, other than the check...

Hello, thank you for writing in. The moment you put your key in the ignition, or get into the vehicle with a keyless starting system, the vehicle begins to run tests on its monitored components. The oil pressure system is...

Hi there. It's quite possible that an electrical relay that helps control the electronic throttle control is damaged, causing the acceleration problems you are having. It's also possible that an entirely different component or system is faulty. The best way...

Your key is a transponder key. The transponder in the key works together with the theft deterrent module that is attached to the ignition lock cylinder. The only good way to test this system is with a shop level scanner...

I would try plugging the chord in another plug just to make sure it is not the chord. The plugs are rather simple. The sides are the ground and only the very center piece at the very back of the...

It is up to you to get approval from the location where you want the services done and let the location owner know what will be done. I have done services at many different locations and have been stopped in...

Hello, If your car is stalling when in neutral, then the first thing I would check is the idle air control valve (ICV). The idle air control valve is the component responsible for maintaining engine idle speed when in neutral....

Hello. The humming noise you are hearing might be coming from the wheel bearing. If the noise is more prevalent on a left turn than a right turn then this will indicate a problem with the right wheel bearing. Wheel...

Hey there. Your cooling system consists of several components. Thermostat, radiator, heater core, and water pump are just a few. Since the thermostat has been replaced, it is more than likely not the cause of the engine running hot. If...

The P0113 code relates to a problem with the intake air temperature (IAT) sensor. The computer is seeing a reading that is outside of its normal parameters and is causing the computer to set the code. This could also be...

Hello. There are mechanical parts in the seat that are stopping the seat from going down. If the seat is controlled by electricity, then those fuses could cause this problem. A certified technician can complete a diagnosis and will be...

Yes, the inside tire wear is most likely attributed to the negative camber setting that can be accelerated by excessive toe-in as the tires are competing to determine the track of the vehicle. If you do get the alignment you...

Hello There, This is quite likely a sign of a failing or clogged catalytic converter. The catalytic converter converts toxic exhaust gases into less harmful pollutants that are suitable to be expelled into the atmosphere. When this is clogged, this...

Since the symptoms changed when you touched the battery terminal, it leads me to believe you may have a poor connection and the main battery terminals. If they are badly corroded or have any small cracks, the terminal may be...

This is a sign that the control module has detected a problem somewhere, in one of the vehicles systems. It will be necessary to connect a code reader to the vehicle and pull the diagnostic trouble codes to see what...

Whether your vehicle's transmission is automatic or manual will change the diagnosis a bit. Both types of transmissions use a linkage system to connect the shifter to the transmission under the hood. Any binding or broken mechanical connection will cause...

I would recommend pulling the cylinder heads off to inspect considering 2 of the push rods broke. This may have caused material from the broken rods to be scattered throughout the valve train or potentially other places in the motor....

From what you've described, it sounds like you may have a mass airflow sensor that is giving incorrect data for the altitude you are at. This can cause low power, pinging, and O2 codes indicating a too lean condition. A...

The ABS Warning Light is located on the instrument panel. When there is a problem with the ABS (anti-lock brake system), or the brake assist system, the light will illuminate. As brakes are the most important safety feature on your...

Hi and thanks for your input on your vehicle. When you hear a thunk sound coming from the front of the vehicle, you need to determine if the sound occurs anytime or if the sound only occurs when braking and...

Hi! That seems to be a very unsual issue on a vehicle with such low miles. I'm curious what the Acura dealer service department said about this. Being that your TLX is so new and covered under warranty, I suggest...