Q: Windshield wipers not working

Hi. This can happen for a number of reasons. It may be the transmission or it can be a braking system failure. If the vehicle will not move at all, even in neutral, then the brakes may be locked up....

The vehicle may have unmetered air entering the engine, which is air entering the tubes between the mass airflow sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-mass-airflow-sensor) and the throttle body (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-throttle-body). If there are no leaks, then the fuel trims in the data would need...

I would recommend checking the Kelly Blue Book Value (http://www.kbb.com/) for your car which is relevant to your particular zip code. This should give you an indication of generally what the car is worth. You will of course want to...

Hello. A code p0013 (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) stands for the variable camshaft timing solenoid voltage being out of range. This could mean low or high voltage. The variable camshaft timing is measured by a senor who's input is uses constantly by the...

Hello, It sounds like you may have a faulty MAP sensor that may be creating an adverse signal to the change in engine load. The Manifold Absolute Pressure (MAP) sensor senses engine load and generates a signal that is proportional...

Hi there - I believe the throttle body (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-throttle-body) on your engine is worn out, specifically the throttle sensor portion of the unit (internal component). It needs to be replaced. I recommend a throttle body inspection (https://www.yourmechanic.com/services/loss-of-power-inspection) performed by a...

Hello, Unfortunately, in extreme cold weather the fluids in your car are not thin enough in their cold state to be forced through internal seals, which can cause them to tear the seals. When this happens, various fluid leaks (https://www.yourmechanic.com/services/oil-fluid-leak-inspection)...

The first thing to do is to scan the computer systems to get the codes stored for the traction light being on. The noise may be coming from the sway bar links or the struts are worn and will make...