Q: Where is the internal transmission filter located on a 2005 Ford 500

asked by on

I’m trying to change my transmission internal filter on my car and I can’t find it
My car has an automatic transmission.

This transmission has a filter screen and no need to replace it in normal services. If the screen gets clogged then the transmission may need to have major repair or replacement.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Where is the internal transmission filter located on a 2005 Ford 500

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Fuel pump will not kick on and all the fuaes and relays are fine and its hooked up right, what is the problem?

You have a circuit opening relay behind the glove box and the EFI relay in the main fuse box in the engine compartment. You will need to have the complete circuit checked to see if they are supplying power. These...

Q: Canister Purge Valve or EVAP Canister Vent Hose

Diagnostic Trouble Code P2195 suggests the vehicle is running too rich. That's not good for the catalytic converter as the converter can overheat and be damaged if too much in the way of unburned hydrocarbons are introduced to the converter....

Q: Do i have to buy new engine if water rusty in plugs and car won't start..

It is very common for the cylinder head gasket on these engines to leak oil and coolant. You may have to replace the cylinder head if it is damaged. If you have water mixed in the engine oil, then...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...