Q: Where is the button for the vdc located? 2006 Infiniti G35

asked by on

I have a vdc light on

My car has 200 miles.
My car has an automatic transmission.

Hi there - the VDC switch (labeled "VDC ON") should be just above the slot for the key fob on your vehicle. THe VDC light being on means this system - Vehicle Stability Control - is "on" and functioning properly. This should be the default position - VDC "ON".

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Where is the button for the vdc located? 2006 Infiniti G35

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Where is the Crankshaft Position Indicator on a 1998 Infiniti QX4?

The crankshaft position sensor is typically externally mounted on the engine near the crankshaft pulley. I would recommend checking near the crankshaft pulley for this answer. If you need help with the replacement of the crankshaft position sensor, I recommend...

Q: Oil spilled all over the bottom of the car and in the hood area. What damages to certain parts could occur?

Oil will not damage painted or finished surfaces or any metal surfaces such as that of the exhaust system. If left in contact for a long time, engine oil will contaminate, degrade, and damage the rubber components on the motor...

Q: How do I know if the timing belt has been replaced?

You are correct in that the car fax may not necessarily always indicate every service performed as not all shops report the services they perform. Unfortunately, there is no definitive way to tell for sure whether or not the timing...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.