Q: when first started or ignition switch is turned on 2009 ford expedition starts clicking noise in dashboard
when first started or ignition is turned on there is a somewhat loud clicking noise in dashboard behind radio area in middle of dash. clicks 3 to 4 times and repeats 2-3 times then goes away. sounds like when something gets stuck but everything works
My car has 98000 miles.
My car has an automatic transmission.
Recommended Services
| Heating AC Inspection | $94.99 - $114.99 | Get a Quote |
That is most likely a malfunctioning component in the ventilation controls, such as an actuator or blend door. It’s actually not uncommon and thus there are quite a few reports of this "clicking". To resolve it requires a bit of disassembly. If you want a conclusive diagnostic and repair estimate, please schedule using YourMechanic’s HVAC system diagnostic service request page. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Check Engine light on, air conditioner not working, and car stalls
If your vehicle is stalling and shaking, and the Check Engine light has come on I would recommend having a knowledgable technician, such one from YourMechanic, scan the vehicle for trouble codes. (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) Check Engine lights and engine performance issues...
stalls when put in gear
The idle control valve may be stuck or you have a vacuum leak. Try to disconnect the vacuum lines to the EGR valve to see if it still stalls. This may be due to problems in the vacuum system. Try...
Car jolts on starting and sometimes is fine
The vehicle may have more than one problem and would need to be thoroughly checked in order to properly diagnose the problem. I would recommend having a certified mechanic test the system's computer and perform a road test to see...
Should I change my transmission fluid.
I would not recommend changing the fluid (https://www.yourmechanic.com/article/how-often-do-i-need-to-replace-the-transmission-fluid) or getting a flush on the transmission since you are already starting to have a problem. A service may make it worse at this point. I would have the transmission checked by...
Stalling when stopping reverse
Hello there, a few different faults could cause the stalling when pressing the brakes on your 1998 GMC C2500. The most likely would be a power brake booster (https://www.yourmechanic.com/services/hydraulic-brake-booster-replacement), vacuum leak (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-vacuum-leak), EGR (https://www.yourmechanic.com/services/exhaust-gas-recirculation-egr-valve-replacement), or vacuum line failure (https://www.yourmechanic.com/services/vacuum-hose-s-replacement). Any...
My engine light was on so I took my vehicle to auto zone and got a p0014 code read. It says the exhaust camshaft positioning timing is over advanced. Can you help?
Hi there: The P0014 is the OBD-II generic code (https://www.yourmechanic.com/article/p0014-obd-ii-trouble-code-camshaft-position-b-timing-over-advanced-or-system-performance-bank-1-by-jay-safford) that the engine control module (ECM) has determined that the bank 1 exhaust camshaft is more advanced than what the ECM has commanded it be. This over-advanced condition could be...
Oil in coolant or rusty coolant?
Hi there. Typically when you see a copper like color in the coolant, it's a sign of rust coming from the inner radiator. Having a professional mobile mechanic complete a good radiator flush (https://www.yourmechanic.com/services/cooling-system-flush) should clean the system, however, if...
Am I being scammed?
I hesitate to say anyone is pulling a scam, but it does sound like you've been through a lot. Lets take things one at a time. To start with, it's not uncommon for transmissions to fail after a fluid service....
Vibration when i move
You may have a bad rear drive joint or problems with the wheel bearing on the rear. Have the rear joints and bearings along with the brakes inspected for worn out components or loose components.
Related articles
A Buyer’s Guide to the 2012 Ford F-250
When When it comes to large, heavy-duty pickup trucks, the 2012 Ford F-250 only has two competitors – the Chevrolet Silverado HD and the Dodge Ram 2500/3500. Though the F-250 doesn’t outperform the Ram in the towing department, it certainly...
The Best Used Cars to Buy if You're Hauling a Horse Trailer
Horse Horse owners need a vehicle with towing capacity. Depending on the size of your trailer and the weight of your horse or horses, you probably won’t be able to get away with less than a 3,000-pound towing capacity, and...
How to Get Ford Dealership Certified
Ford car dealerships offer automotive technician jobs to mechanics who are certified through either the ASSET or the FACT program.
Browse other content
Services
Maintenance