Q: What do I have to replace when the oil pump belt cuts and affects starting sensor?
Hello there, Please the oil pump belt cuts, affected the starting sensor which in turn affected the pan that goes in the starting sensor. My question is, asides changing the belt, starting sensor and the pan that seems bent, Should I be scared it would have affected the valve? Or the car would start if I replace those three things, oil pump belt, starting sensor and pan?
My car has 125000 miles.
My car has an automatic transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
How do I set a station preset on the radio?
While you can use the tuning knob, the seek button or the scan button to find stations to listen to, you can also program in your favorite stations so you can listen to them without having to cycle through the...
What do I do if the engine doesn’t start?
There are several potential reasons for your car not to start. Here are the steps you should take to troubleshoot the problem: Turn the key to on. Does the starter engage? If it does engage, is it slow? If this...
Car won't start; just clicks
Hi. A clicking noise when trying to start your car and no engine movement typically means that the battery is too low to crank the engine or there may be a bad connection at the battery. If the battery and...
Clutch not working
If your clutch is not working then it may have a bad clutch cable or the clutch itself is bad. A mechanic would typically inspect the condition of the cable and make sure it is moving properly. If it is...
Engine code P1155
Hi there. The A/F sensor you are referring to is Toyota's alternate name for an oxygen sensor. It is a likely code to come up for vehicles with accumulating miles. A certified technician can easily verify the cause your Check...
hi my car wil rev until 4000 rpm only, what should i chek???
Hi there, thanks for writing in. This is a difficult question to answer with the limited information provided and not being able to see the car in person. This issue could be caused by several possible problems and only a...
Transmission issue after a long drive
Do not change the fluid or have it flushed. This could cause the transmission to go out even sooner. There are a load of different additives out there that may or may not work, but when the transmission is going...
Is this a help for ford care issue
Hello, thank you for writing in. With the light illuminating and then turning off right away, there are no major causes for concern at this exact moment. You may want to Several systems are tied into the Advanced Trac, and...
2000 jeep grand cherokee laredo seems like it wants to stall or lose power when it starts and is iding or you take off sometimes
This may be a sign of a faulty MAP sensor as the vehicle responds adversely to a load put on the motor (i.e. putting it in gear, making turns (which makes use of the power steering pressure switch) turning on...
Related articles
The Best Used Cars to Buy If You're in a Wheelchair
Being Being in a wheelchair means you have a very specific list of demands, and requests for your vehicle. The main focus is of course how you will get in and out of the vehicle. There are some other aspects...
How to Tighten a Drive Belt
If you have just replaced your drive belt (https://www.yourmechanic.com/article/common-signs -your-drive-belt-needs-replacement) and you are noticing high-pitched squeaking or squealing under the hood,...
How to Get Hyundai Dealership Certified
Hyundai dealerships offer automotive technician jobs to mechanics who are certified through Professional Automotive Career Training and Global e-Campu
Browse other content
Estimates
Cities