Idle air control system RPM lower than expected, all cyli...

Idle air control system RPM lower than expected, all cylinders misfire detected, crankshaft position- camshaft position correlation bank 1 Sensor A on VW Tiguan 2009 Mechanic's Assistant: Does the vehicle stall at low spee...

Idle air control system RPM lower than expected, all cylinders misfire detected, crankshaft position- camshaft position correlation bank 1 Sensor A on VW Tiguan 2009 Mechanic's Assistant: Does the vehicle stall at low speeds? Does it sputter? Yes and not power Mechanic's Assistant: Are you fixing your Tiguan yourself? What have you tried so far? Yes I want to fix it self. I change the spark plugs and one ignition coil and clean a little bit the throttle Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Just today I put gas line in the tank and that’s it

Automotive Expert
Hello, my name is \*\*\*\*\* \*\*\*\*\* to Just Answer! I will be assisting you with your questions today. Give me one moment while I review this.
Automotive Expert
I’m very sorry that you’re having this issue and together, we will get this figured out. I will need your help too because I can’t see, touch, hear or smell anything that’s going on with your vehicle. We may also require some specialized testing tools in order to assist us in diagnosing the problems due to the complexity of today’s vehicles. JA will offer a phone call to you at an additional fee, it’s your choice. Please be patient with my replies, I reply back in question order received. If I send you an attachment, I will tell you, BUT, you will NOT get it on a phone; you must be on a tablet or PC. Please let me know when you are satisfied with my answers too so we can close out your question. We first need to get the codes out of the computer along with the freeze frame data. We will also need MODE 6 misfire data. We may need to check compression with a gauge too depending on the scan test results. Thanks again and all the best:) Ron Please feel free to text me back if you need any more help. Thanks again and be well:) Ron

Customer attachment 3/6/2021 3:18:44 PM
Automotive Expert
Great, please provide the rest of the data I requested. Thanks again. Ron

I just have a mobile phone and a ThinkDiag system
Automotive Expert
That's fine, but you will need a PDF reader app if I do send you anything. Thanks again, Ron

Ok I have the app
Automotive Expert
Please text me back with ALL the data I asked for above. Thanks again, Ron can't quite understand but I'm trying
Automotive Expert
Please SCROLL UP and read my initial reply to you of what I'm needing. Thanks again, Ron

What others are asking

Brake light stays on when car is off
The brake light switch or pedal linkage is likely causing the lights to stay on. I recommend having a mechanic, like one from YourMechanic, come to you to find the cause of the brake light staying on ( and quote...
Engine shudder while driving, burnt rubber smell
Hello. Most of the time, this is the first indication that the timing belt is failing ( The timing belt needs to be checked to see if it is going bad. If the belt is fine, then you may have...
How much does it cost to replace 2008 Turbo 200 engine?
This actually could be as simple as replacing the idle air control valve ( Sometimes when the IAC fails, it can cause the car to lunge forward. I would recommend having your IAC valve tested by a qualified professional to...
Engine coolant leak - 2000 GMC Savana 3500
Hi and thanks for contacting YourMechanic. Looks like the coolant is coming from the rear freeze plug on the back of the engine. For this issue, I would recommend putting coolant dye in the cooling system and run the engine...
Car shakes and stalls when I press the accelerator.
Hello There, Shaking or vibration ( may be caused by many different things such as faulty spark plugs, poor fuel pressure or misfires. Other things such as a faulty idle air control valve ( may cause the engine idle to...
Dodge charger has18.3 avg for fuel
Hi There, I believe we will need a bit more information to properly answer your question, however it appears you are asking about fuel mileage. If you are concerned about fuel mileage, we will need to know if there are...
So had a mechanic work in my vehicle and the threads in the crankshaft was stripped, would i need a new crankshaft or can someone
Hi There, Depending on how badly the threads are stripped, they may be repairable with a Heli Coil, however this would have to be evaluated on a case by case basis as this does not wok for all situations and...
Driver side D1R headlight not working even after replacing bulb.
You will need to most likely need to replace the ballast for the light that is not working and should also check connections for any heat related damage and replace connector along with the ballast.
I added blue devil head gasket sealer and now my car is overheating
Many times when a head gasket fails it can cause the engine to overheat. Oftentimes head gasket sealer products do not work and therefore the same symptoms of a faulty head gasket will still exist. If you have a faulty...